IBM 인증000-314시험에 도전해보려고 하는데 공부할 내용이 너무 많아 스트레스를 받는 분들은 지금 보고계시는 공부자료는 책장에 다시 넣으시고ITExamDump의IBM 인증000-314덤프자료에 주목하세요. ITExamDump의 IBM 인증000-314덤프는 오로지 IBM 인증000-314시험에 대비하여 제작된 시험공부가이드로서 시험패스율이 100%입니다. 시험에서 떨어지면 덤프비용전액환불해드립니다.
현재 경쟁울이 심한IT시대에,IBM 000-314자격증 취득만으로 이 경쟁이 심한 사회에서 자신만의위치를 보장할수 있고 더욱이는 한층업된 삶을 누릴수 있을수도 있습니다. 우리ITExamDump 에서 여러분은IBM 000-314관련 학습지도서를 얻을 수 있습니다. 우리ITExamDump는 IT업계엘리트 한 강사들이 퍼펙트한IBM 000-314문제집을 만들어서 제공합니다. 우리가 제공하는IBM 000-314문제와 답으로 여러분은 한번에 성공적으로 시험을 패스 하실수 있습니다. 중요한것 저희 문제집을 선택함으로 여러분의 시간도 절약해드리고 무엇보다도 많은 근심없이 심플하게 시험을 패스하여 좋다는 점입니다.
시험 번호/코드: 000-314
시험 이름: IBM (IBM WebSphere Message Broker V6.1. System Administration)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 106 문항
업데이트: 2014-03-24
지금21세기 IT업계가 주목 받고 있는 시대에 그 경쟁 또한 상상할만하죠, 당연히 it업계 중IBM 000-314인증시험도 아주 인기가 많은 시험입니다. 응시자는 매일매일 많아지고 있으며, 패스하는 분들은 관련it업계에서 많은 지식과 내공을 지닌 분들뿐입니다.
IBM인증 000-314시험패스는 IT업계종사자들이 승진 혹은 연봉협상 혹은 이직 등 보든 면에서 날개를 가해준것과 같습니다.IT업계는 IBM인증 000-314시험을 패스한 전문가를 필요로 하고 있습니다. ITExamDump의IBM인증 000-314덤프로 시험을 패스하고 자격증을 취득하여 더욱더 큰 무대로 진출해보세요.
요즘같이 시간인즉 금이라는 시대에 시간도 절약하고 빠른 시일 내에 학습할 수 있는 ITExamDump의 덤프를 추천합니다. 귀중한 시간절약은 물론이고 한번에IBM 000-314인증시험을 패스함으로 여러분의 발전공간을 넓혀줍니다.
000-314 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-314.html
NO.1 In a new implementation of the WebSphere Message Broker (WMB), an insurance company has
decided that the Message Broker Explorer (SupportPac IS02) will be implemented. They have never used
JMS with WebSphere MQ. Which feature in the Message Broker Explorer requires MQ JMS configuration?
A.Adopt a new broker
B.Full service tracing
C.WebSphere DataPower Security Wizard
D.Connect to a remote configuration manager
Answer:C
IBM 000-314 000-314자격증 000-314
NO.2 A large utility company has decided to implement messaging using WebSphere MQ with WebSphere
Message Broker (WMB) V6.1. The production broker will be hosted on the z/OS system where Resource
Recovery Service (RRS) has been configured and is active. What must the administrator do to ensure all
transactional message flows will be globally coordinated on this production broker?
A.Nothing.
B.Ensure the message flow is configured as a coordinated transaction in the bar file.
C.In the bar file, ensure the Transaction mode setting for the MQInput node is properly set to "Yes" and all
other Transaction modes are set to "Automatic".
D.Configure DB2 for XA coordination; configure the queue manager for XA coordination; and ensure the
message flow is configured as a coordinated transaction in the bar file.
Answer:A
IBM 000-314 000-314 000-314덤프 000-314시험문제
NO.3 A broker administrator must set up policy set bindings for a new message flow. The flow includes the
following SOAP nodes: SOAPInput, SOAPAsyncRequest, SOAPAsyncResponse and SOAPReply. Which
two SOAP nodes result in the need for a consumer policy set binding definition?
A.SOAPInput
B.SOAPReply
C.SOAPAsyncRequest
D.SOAPAsyncResponse
Answer:C D
IBM시험문제 000-314기출문제 000-314 000-314
NO.4 A developer is writing an application that needs to coordinate the processing of MQ messages and
database updates in a message flow for distributed systems. What does the broker administrator need to
configure as the XA Resource Manager?
A.The broker
B.The database
C.The queue manager
D.The operating system
E.The configuration manager
Answer:C
IBM 000-314 dumps 000-314 000-314 pdf 000-314
NO.5 As part of the migration from WebSphere Message Broker (WMB) V6.0 to V6.1, a developer has
provided the administrator a list of Java user-defined nodes that need to be migrated. The migration will
be from WMB V6.0 on one machine to WMB V6.1 on a different machine. Which three steps need to be
performed?
A.Clean the project in the Package Explorer.
B.Import the user-defined node project into the V6.1 Toolkit.
C.Use Rational Product Updater (RPU) to perform the migrations.
D.Run mqsimigratecomponents specifying the user Jar files directory.
E.Store the .pdb file in the directory specified by the -l parameter on the mqsichangebroker command.
F.Store the .jar file in the directory specified by the -l parameter on the mqsichangebroker command.
Answer:A B F
IBM 000-314 000-314인증 000-314자격증 000-314기출문제
NO.6 Files in the specified input directory are not being processed by a flow that uses a FileInput node. The
error messages indicate that the file nodes cannot continue executing (BIP3331). What is the cause of the
error messages?
A.The file is locked during this directory scan.
B.The input file exceeds the maximum file size.
C.The broker does not have the required access to these files and directories.
D.There is more than one instance of this message flow deployed to this computer.
Answer:C
IBM 000-314 000-314인증 000-314 000-314 dump
NO.7 A broker administrator needs to connect via the Configuration Manager Proxy API Exerciser to a
configuration manager running on Solaris which was configured using default settings and managing a
BRKR1 broker running on a Windows XP environment. What four selections need to be furnished to
successfully connect to the configuration manager?
A.Port number 1414
B.Configuration Manager name
C.BRKR1 queue manager name
D.Configuration Manager hostname
E.SYSTEM.BKR.CONFIG channel name
F.Configuration Manager queue manager name
G.SYSTEM.DEFAULT.BKR.CONFIG channel name
Answer:A D E F
IBM 000-314 000-314
NO.8 A company's IT division has a broker domain consisting of a single broker BRK configured to
configuration manager CFGMGR. Both the components are running on a single AIX server. A new
security policy was put in place by the company which required all components to be started and stopped
under a new user ID. Which setup does the administrator need to perform to enable the broker and
configuration manager to be started or stopped with the new user ID?
A.Create a UserNameServer and add the new user ID.
B.Add the new user ID to mqm and mqbrkrs groups of the machine.
C.Run the mqsichangebroker command with the new user ID and password.
D.Run the mqsichangedbimgr command with the new user ID and password.
E.Run the mqsisetdbparms command adding the new user ID and password.
Answer:B
IBM 000-314 000-314최신덤프 000-314
NO.9 An application has a requirement that tables in the broker database be accessible with an ID that is not
the service ID of the broker using ODBC Data Source Names (DSN). What are the two tasks the
administrator needs to do?
A.Create an ODBC DSN to the broker database with mqsicreatedb.
B.Setup an ODBC DSN to the broker database with mqsi_setupdatabase.
C.Define an ODBC DSN to the broker database with another alias name.
D.Associate the application ID and password with the alias name with the mqsisetdbparms command.
E.Associate the application ID and password with the alias name with the mqsisetsecurity command.
Answer:C D
IBM 000-314최신덤프 000-314최신덤프
NO.10 A large bank has six brokers that are geographically dispersed. Three of the brokers are used in a
publish/subscribe collective while three are not. For backup purposes, the decision has been made to use
three cloned brokers. Which choice is the most appropriate?
A.Use only one broker in the collective as a clone.
B.Use all three of the brokers in the collective as the clones.
C.Make two brokers from the collective clones, in case one fails.
D.Use no brokers in the collective as clones, it is not permitted.
Answer:A
IBM덤프 000-314 000-314 pdf 000-314자료 000-314자격증
NO.11 A large enterprise is building several application message flows that include HTTPInput nodes. There is
a requirement to take advantage of WS-Security for the decryption of incoming messages to these flows
as well as encryption of data from the flows. The administrator needs to handle the necessary
configuration. What is the most efficient way to do this with the least impact on changing code or broker
configuration?
A.Use the IBM WebSphere MQ Internet Gateway.
B.Implement a WebSphere DataPower appliance.
C.Set up IBM WebSphere Transformation Extender for Integration Servers.
D.Create a new broker on a separate system using it to front-end all the security.
Answer:B
IBM 000-314 000-314 000-314
NO.12 An administrator has set up topic-based security as shown in the Exhibit. Which user(s) will have
access to perform publish action on the topic TopicA/TopicY/TopicM?
A.Only user1
B.Only user2
C.Only user3
D.Both user1 and user3
Answer:A
IBM기출문제 000-314기출문제 000-314기출문제 000-314
NO.13 A production broker in a large bank is being configured to allow WebSphere Application Server to be the
JMS provider. Defaults were used for directory paths during installation of the product. When creating a
JMSProvider configurable service for the WebSphere_WAS_Client, the administrator issues the following
command: mqsichangeproperties WBRK6_DEFAULT_BROKER -c JMSProviders -o
WebSphere_WAS_Client By default, where must the provider's Jar files be located on an AIX production
broker system?
A./var/mqsi/shared-classes
B./opt/IBM/mqsi/6.1/classes
C./var/mqsi/common/profiles
D./opt/IBM/mqsi/6.1/JMSProviders
Answer:A
IBM 000-314 000-314시험문제
NO.14 A developer has built a flow that uses the EmailOutput node to send notifications of order shipments.
The SMTP server requires authentication with a specific user ID and password. What does the
administrator need to do before the developer attempts to deploy the flow?
A.Create a security identity with mqsisetdbparms.
B.Update the default SMTP configurable service with mqsiupdatebroker.
C.Create a SMTP configurable service with mqsicreateconfigurableservice.
D.Include the message set that contains the SMTP configuration information.
Answer:A
IBM시험문제 000-314덤프 000-314최신덤프 000-314자료
NO.15 An administrator wants to quickly configure a broker to make use of HTTP over SSL on a development
environment with minimum configuration. Which property must be set by running the command
mqsichangeproperties?
A.port
B.keystorePass
C.keystoreFile
D.enableSSLConnector
Answer:D
IBM자료 000-314 000-314 000-314최신덤프
NO.16 The administration team has decided to retain control over the infrastructure but wants to allow the
developers to deploy flows at will in the development environment. The developers need to change trace
and debug properties of execution groups (EGs), but not brokers. Which Access Control List (ACL)
permissions do the developers require?
A.Full to the EGs
B.View to the Root and Edit to the EGs
C.View to the Brokers and Deploy to the EGs
D.Deploy to the Brokers and Edit to the EGs
Answer:A
IBM dump 000-314 000-314 000-314 000-314 000-314시험문제
NO.17 A company has its broker BRK running on machine brk.comp.com under the queue manager BRKQM
listening at port 1414. It is registered to configuration manager CFGMGR running on machine
cfg.comp.com under the queue manager CFGQM listening at port 1420. An administrator is entrusted
with the task of creating an execution group EXE1 under the broker BRK. Which command should be run
to achieve this task?
A.mqsicreateexecutiongroup -i brk.comp.com -q CFGQM -b BRK -e EXE1
B.mqsicreateexecutiongroup -i cfg.comp.com -n CFGMGR -b BRK -e EXE1
C.mqsicreateexecutiongroup -i cfg.comp.com -p 1420 -q CFGQM -b BRK -e EXE1
D.mqsicreateexecutiongroup -i brk.comp.com -p 1414 -q BRKQM -b BRK -e EXE1
Answer:C
IBM dumps 000-314자료 000-314 000-314 dump
NO.18 An administrator needs to control domain objects that are deployable. To which three objects is it
possible to grant the Deploy Access Control List (ACL) permission?
A.Broker
B.Topology
C.Root Topic
D.Subscription
E.Execution Group
F.Configuration Manager
Answer:A C E
IBM 000-314 pdf 000-314최신덤프
NO.19 Under a load test in the Pre-PROD environment, the performance test has shown that the broker
cannot sustain the required peak number of HTTP connection requests. What is an appropriate action?
A.Create another Execution Group and deploy another copy of the flow.
B.Change the httplistener component parameter '-n maxThreads' to a higher value.
C.Increase the number of 'Additional Instances' of the flow and redeploy the flow.
D.Increase the number of 'Additional Instances' of the HTTPInput node and redeploy the flow.
Answer:B
IBM dumps 000-314시험문제 000-314인증 000-314시험문제 000-314
NO.20 A broker domain has two brokers, BRK1 and BRK2, configured to a configuration manager CFGMGR.
A new set of applications wants to take advantage of the publish/subscribe topic-based security. Which
steps does the administrator need to perform?
A.Create a UserNameServer and run the mqsichangeproperties command on the brokers and the
configuration manager to include the UserNameServer name.
B.Run the command mqsichangeproperties command on the brokers and mqsichangeconfigmgr on the
configuration manager to activate Access Control List's on the topics.
C.Run the command mqsijoinmqpubsub against each application name and change all the brokers with
the mqsichangebroker command to enable the security option on topics.
D.Create a UserNameServer and run the mqsichangebroker command on the brokers and
mqsichangeconfigmgr on the configuration manager to include the UserNameServer queue manager
name.
Answer:D
IBM 000-314 dumps 000-314 pdf 000-314 000-314 pdf
ITexamdump의 70-481덤프의 VCE테스트프로그램과 JN0-692덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-274시험에 대비한 고품질 덤프와 000-N52시험 최신버전덤프를 제공해드립니다. 최고품질 CAT-221시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기