IT인증시험을 쉽게 취득하는 지름길은ITExamDump에 있습니다. ITExamDump의VMware인증 VCAP5-DCD덤프로 시험준비를 시작하면 성공에 가까워집니다. VMware인증 VCAP5-DCD덤프는 최신 시험문제 출제방향에 대비하여 제작된 예상문제와 기출문제의 모음자료입니다. VMware인증 VCAP5-DCD덤프는 시험을 통과한 IT업계종사자분들이 검증해주신 세련된 공부자료입니다. ITExamDump의VMware인증 VCAP5-DCD덤프를 공부하여 자격증을 땁시다.
VMware인증 VCAP5-DCD시험은 등록하였는데 시험준비는 아직이라구요? VMware인증 VCAP5-DCD시험일이 다가오고 있는데 공부를 하지 않아 두려워 하고 계시는 분들은 이 글을 보는 순간 시험패스에 자신을 가지게 될것입니다. 시험준비 시간이 적다고 하여 패스할수 없는건 아닙니다. ITExamDump의VMware인증 VCAP5-DCD덤프와의 근사한 만남이VMware인증 VCAP5-DCD패스에 화이팅을 불러드립니다. 덤프에 있는 문제만 공부하면 되기에 시험일이 며칠뒤라도 시험패스는 문제없습니다. 더는 공부하지 않은 자신을 원망하지 마시고 결단성있게ITExamDump의VMware인증 VCAP5-DCD덤프로 시험패스에 고고싱하세요.
시험 번호/코드: VCAP5-DCD
시험 이름: VMware (VMware Certified Advanced Professional 5 - Data Center Design (VCAP5-DCD))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 279 문항
업데이트: 2013-12-18
인재가 넘치는 IT업계에서 자기의 자리를 지켜나가려면 학력보다 능력이 더욱 중요합니다.고객님의 능력을 증명해주는 수단은 국제적으로 승인받은 IT인증자격증이 아니겠습니까? VMware인증 VCAP5-DCD시험이 어렵다고 하여 두려워 하지 마세요. IT자격증을 취득하려는 분들의 곁에는ITExamDump가 있습니다. ITExamDump의VMware인증 VCAP5-DCD시험준비를 하시고 시험패스하여 자격증을 취득하세요. 국제승인 자격증이라 고객님의 경쟁율을 업그레이드 시켜드립니다.
이 글을 보시게 된다면VMware인증 VCAP5-DCD시험패스를 꿈꾸고 있는 분이라고 믿습니다. VMware인증 VCAP5-DCD시험공부를 아직 시작하지 않으셨다면 망설이지 마시고ITExamDump의VMware인증 VCAP5-DCD덤프를 마련하여 공부를 시작해 보세요. 이렇게 착한 가격에 이정도 품질의 덤프자료는 찾기 힘들것입니다. ITExamDump의VMware인증 VCAP5-DCD덤프는 고객님께서 VMware인증 VCAP5-DCD시험을 패스하는 필수품입니다.
VCAP5-DCD 덤프무료샘플다운로드하기: http://www.itexamdump.com/VCAP5-DCD.html
NO.1 Storage DRS can be enabled and can balance I/O levels based on _______________
A. real-time stats
B. historical stats
Answer: B
VMware덤프 VCAP5-DCD자료 VCAP5-DCD VCAP5-DCD VCAP5-DCD
Explanation:
Storage DRS can balance I/O by using storage vMotion. This would be based on historical valuesfor a
period of time.
Storage DRS would make decisions based on these figures. If the system were using realtimestats,
the machines could potentially migrate a lot more. This could have an effect on the latency
figuresfor some systems. The larger historical sampling in storage DRS allows the system to make a
decision withlimited risk of impacting I/O-unlike moving a virtual machine over and over again.
Chapter 4, Storage Design - The Logical & Physical Approaches
NO.2 You are working on a hybrid cloud project, where production applications (yet to be fully
developed) are to be deployed. Which of the following is a project requirement?
A. The production data must be in the UK at all times.
B. The hosting partner provides sufficient resources without overcommitment to support
application load.
C. The hosting provider meets uptime expectations.
D. The development team provides the software on time.
Answer: A
VMware인증 VCAP5-DCD VCAP5-DCD인증 VCAP5-DCD VCAP5-DCD
Explanation:
A requirement is a definable and measurable project item. It must be part of the delivery, and
itsremoval cannot be justified. Chapter 2, Definitions of Key Terms
NO.3 In the project life cycle, the ____________ defines the vision.
A. IT architect
B. software vendor
C. business
Answer: C
VMware VCAP5-DCD dumps VCAP5-DCD VCAP5-DCD dumps VCAP5-DCD시험문제
Explanation:
By reviewing the current configuration of a system and mapping the final status of components
asdescribed in the vision, the business identifies the gap between the two. A gap state analysis is a
review of theitems or tasks that are required to progress between the stages. Such an analysis is
useful in creatingmilestone plans, implementation orders, and so on. Chapter 2, Gathering
Information and Spotting the Gaps
NO.4 A(n) _____________ is an item that is taken to be true in the design phases but has not been
tested prior to execution.
A. requirement
B. constraint
C. assumption
D. risk
Answer: C
VMware VCAP5-DCD시험문제 VCAP5-DCD VCAP5-DCD
Explanation:
An assumption could impact your design. It is good to ensure that project team and widerbusiness
are aware of assumptions and that they are agreed and validated as part of the design
considerationprocess. Chapter 2, Gathering Information and Spotting the Gaps
NO.5 A DR project requires a recovery time objective (RTO) of 4 hours and has a recovery point
objective (RPO) of 2 hours. The system fails at 8 p.m. on a Sunday evening. At what time is the
application expected to be available to the end users?
A. Midnight
B. 10 p.m.
C. 2 a.m.
D. 11 p.m.
Answer: A
VMware덤프 VCAP5-DCD dumps VCAP5-DCD VCAP5-DCD pdf
Explanation:
The recovery time objective (RTO)-also known as the return to operation-is the amount of timeit
takes to restore a service after a failure has taken place. The recovery point objective (RPO) is the
point intime to which the system needs to be restored following a failure.
Chapter 3, RTO, RPO, and All That Stuff?
NO.6 You are a VMware architect employed to design and build application environments and the
underlying platform for a software development company. The company is using a "devops"
approach and has engaged with you at the beginning of the first planning meeting/pre-sprint.
The software has yet to be written. However, you have some high-level specifications that are
subject to change at each of the early meetings.
The ______ is more logical for virtual machine sizing.
A. predictive sizing approach based on current software
B. adaptive sizing approach
Answer: B
VMware자료 VCAP5-DCD자격증 VCAP5-DCD VCAP5-DCD VCAP5-DCD기출문제 VCAP5-DCD
Explanation:
There are two types of scaling approaches in virtual platforms: adaptive and predictive.
Bothapproaches are usable; however, a designer must work out which is the best approach for
each project.
The adaptive approach to guest virtual machine design is a major advantage that virtualization
technologybrings to a datacenter. It allows a guest virtual machine to be created initially on a few
metrics or high-levelrequirements (such as a limited budget) and scaled (that is, grown, not shrunk)
through the virtual machine lifecycle. In many cases, this scaling can be performed hot/live without
outage/downtime to the runningapplications. The predictive approach, on the other hand, requires
more planning and research, and you must know themetrics before deployment. The advantage
here is that once the virtual machine has been deployed, onlyapplication maintenance is required.
The application requirements are known. Chapter 5, Design Approaches
NO.7 You are a technical consultant designing a solution for an online retail company. The project
vision is to deploy a hybrid cloud, with the internal team developing the website on internal
infrastructure and migrating production-ready applications to a hosting provider. The project is
expected to ease deployment and require less infrastructure capital expenditure-without lowering
application quality.
Which of the following is a risk to the project?
A. The solution must adhere to ISO 27001.
B. Change control of the hosting vCloud platform is not under full control of the internal business.
C. The hosting provider outsources the platform support to the platform vendor.
D. The applications to be deployed on the production hosts are not fully developed, although a beta
exists.
Answer: B
VMware자격증 VCAP5-DCD시험문제 VCAP5-DCD
Explanation:
The technical design process enables the platform designer to work in a methodical way and
withothers who have similar objectives. A risk is that a project item could potentially prevent the
vision or aspectsof it (requirements) from being created. Chapter 1, The Technical Design Process
NO.8 When designing a storage platform, which of the following should be considered as part of
the overall design?
A. Capacity
B. I/O requirements of the applications to be supported
C. Disk latency tolerance
D. Growth rate
E. All of the above
Answer: E
VMware기출문제 VCAP5-DCD최신덤프 VCAP5-DCD VCAP5-DCD VCAP5-DCD
Explanation:
A storage platform logical design requires in-depth analysis of factors that can affect applications. In
the case of storage, aspects that relate to the physical layer-such as the amount of usable space
requiredfor services; the size, number, and speed of disks; and how fast the data is being
produced-could have asubstantial impact to the storage platform. Chapter 4, Storage Design - The
Logical & Physical Approaches
NO.9 A best practice can change over time.
A. True
B. False
Answer: A
VMware VCAP5-DCD VCAP5-DCD시험문제 VCAP5-DCD덤프 VCAP5-DCD
Explanation:
A best practice is based on experience with delivering a solution.
A new product will have limitedbest-practice information except for vendor- or
vendor-partner-based recommendations.
The longer atechnology is used in a community, the more potential success; therefore, best
practices can change overtime.
Chapter 6, Validation, Thoughts, and Processes
NO.10 Only a software vendor develops a standard process or configuration.
A. True
B. False
Answer: B
VMware기출문제 VCAP5-DCD시험문제 VCAP5-DCD VCAP5-DCD VCAP5-DCD dumps
Explanation:
A best practice is based on experience with delivering a solution.
A new product will have limitedbest-practice information except for vendor- or
vendor-partner-based recommendations.
The longer atechnology is used in a community, the more potential success; therefore, best
practices may berecommended by non-vendor-related people.
It is up to a designer to validate this information rather thanignore it straightaway. Chapter 6,
Validation, Thoughts, and Processes
19. A logical diagram shows vendor-specific information.
A. True
B. False
Answer: B
VMware dump VCAP5-DCD VCAP5-DCD VCAP5-DCD인증
Explanation:
A logical diagram shows the high-level components of a design or platform. It may
includedescriptions such as data flow and entity relationships.
However, it does not show specific vendors (such asDell or HP). Chapter 2, Creating the design
20. Which of the following vSphere cluster technologies would meet the application
requirements specified in the high-level design extract for question 2?
A. FT
B. HA
Answer: A
VMware VCAP5-DCD dump VCAP5-DCD인증 VCAP5-DCD기출문제
Explanation:
vSphere HA would need to wait at least 10 seconds before a restart would be possible. Thiswould
not meet requirements. In the event of a restart, it could be possible to be without the application
feeddatabase for about 15 minutes. VMware FT would enable the service to be provided without
additionalredevelopment. Chapter 4, Storage Design - The Logical & Physical Approaches
NO.11 You are the technical designer for a vSphere platform transformation project. After
conducting SME interviews and using various platform information-gathering methods, you have
created a high-level design document.
This document specifies the following:
Requirements:
R1. The solution must not have a single point of failure.
R2. Production applications must not have an outage of more than 10 seconds.
R3. Data must be based in the UK.
R4. There is a 7-year retention policy for contracts.
R5. Applications should support existing and developing workloads for the next 3 years' growth.
Spec of servers:
Web 1 vCPU, 2 GB RAM, 100 GB storage App 1 vCPU, 4 GB RAM, 100 Gb storage
DB 2 vCPU, 16 GB RAM, 750 Gb storage
At a late stage in the software development life cycle of a production application developed inhouse,
an unfortunate issue was identified when the application was deployed to the production vSphere
cluster. The production core stacked switch has capacity issues, and this is having a serious impact
on all applications for which the switch is providing network services. Within the test system, the
application works as intended in the single test VLAN and with a single-host configuration.
Which of the following could be tried to help in this situation, from a vSphere perspective? (Choose
two)
A. Redevelop the application for a virtual platform
B. Place the application into a single-vApp network
C. Add DRS rules to keep network traffic within the same host, where possible
D. Configure network I/O control
Answer: B,D
VMware VCAP5-DCD덤프 VCAP5-DCD시험문제
Explanation:
If you limit the application traffic to a specific dedicated network (that is, a separate VLAN) andusing
enforced DRS affinity rules, the application traffic will not traverse the ESXi host's physical
networkinterfaces. This will ensure that the impact of the application is minimized, while also
ensuring that theapplication itself is not limited. The application servers already have vCPU settings.
This suggests that the system has already beingvirtualized in both types of environments. Network
I/O control could be useful in the event of contention, but therole of a designer would be to plan to
prevent contention where possible; other options would be morebeneficial. In addition,
Requirement 5 specifies that the system should work with workloads over the next 3years. Network
I/O control would suggest contention very early in the platform history. Chapter 4, NetWork -
Logical and Physical Design to allow applications to flow
NO.12 Based on the information in the high-level design extract from question 2, what storage
protocol is unsuitable?
A. NFS
B. iSCSI
C. FC
Answer: A
VMware기출문제 VCAP5-DCD최신덤프 VCAP5-DCD VCAP5-DCD인증
Explanation:
The requirements state that the application uptime requirements would not be met if using vSphere
HA alone. vSphere HA would invoke a restart of guest virtual machines after at least 10 seconds.
VMware fault tolerance would meet the uptime requirements; a failover would result in zero
downtime of theapplication. This technology can be used only with VMFS; therefore, NFS cannot be
used in this design. Chapter 4, NetWork - Logical and Physical Design to allow applications to flow
NO.13 Storage DRS is enabled by default.
A. True
B. False
Answer: B
VMware인증 VCAP5-DCD VCAP5-DCD VCAP5-DCD VCAP5-DCD최신덤프
Explanation:
Chapter 4, Storage Design - The Logical & Physical Approaches
NO.14 The vCenter database is powered off ungracefully, along with a three cluster nodes in a
separate cluster.
Will the failed existing ESXi host nodes restart correctly using Auto Deploy?
A. Yes
B. No
Answer: A
VMware자격증 VCAP5-DCD기출문제 VCAP5-DCD pdf VCAP5-DCD최신덤프
Explanation:
Auto Deploy enables an untrained IT professional to increase capacity while ensuring quality
andconsistency within a cluster.
However, there is a dependency on the vCenter server and Auto Deploy serverroles at different
times.
In this case, the ESXi hosts have already booted successfully.
This means that allsubsequent reboots will be controlled using configuration from the Auto Deploy
server, not vCenter.
If thevCenter database is impacted, the ESXi hosts will automatically restore.
Even in the event of no vCenteravailability, hosts will use the last-known copy of a distributed switch
or the configured vSphere switch.
Chapter X, Putting it all together
NO.15 A project requirement _______________
A. must be achieved
B. can be set as aspirational but may never be achieved
Answer: A
VMware dump VCAP5-DCD VCAP5-DCD VCAP5-DCD VCAP5-DCD인증
Explanation:
A project requirement is a specific deliverable that the business has said must be provided at
theend of a project.
It must always be achieved. Chapter 4, Storage Design - The Logical & Physical Approaches
NO.16 A logical design can contain which of the following? (Choose three)
A. BIOS settings
B. Data flow
C. Key component relationships
D. High-level diagrams
E. Server host names
Answer: B,C,D
VMware dumps VCAP5-DCD VCAP5-DCD VCAP5-DCD덤프
Explanation:
A logical diagram can be used to show service components and how they relate to each other.
Alogical diagram is high level in nature and is independent of the hardware used for a solution.
Chapter 2, Presenting the Data Gathered
NO.17 Based on the information in the high-level design extract for question 2, which type of data
store would be required?
A. VMFS
B. NFS
Answer: A
VMware인증 VCAP5-DCD기출문제 VCAP5-DCD VCAP5-DCD덤프
Explanation:
Because fault tolerance would be the only VMware technology that would meet the
technicalrequirements, VMFS is the only choice here. Chapter 4, Storage Design - The Logical &
Physical Approaches
NO.18 You are a virtualization consultant working on a DR project. You have proposed a solution that
uses SAN replication technology to replicate production virtual machine files. This meets the cold
standby requirement.
Which of the following could be a design constraint?
A. The hardware currently being used in the datacenter is out of support.
B. The company is undecided about the choice of centralized storage to be used in the enterprise.
C. The company is at the end of year 1 of a 3-year contract for the point-to-point link between Site A
and Site
D. This link is currently 10 MB.
Answer: C
VMware최신덤프 VCAP5-DCD최신덤프 VCAP5-DCD VCAP5-DCD최신덤프 VCAP5-DCD
Explanation:
An item from the current state analysis that would restrict or change a design choice is potentiallya
constraint. Such factors can limit a design and in some cases prevent the realization of a project
vision. Chapter 2, Gathering Information and Spotting the Gaps
ITexamdump의 HP0-J67덤프의 VCE테스트프로그램과 642-242덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 LOT-958시험에 대비한 고품질 덤프와 000-303시험 최신버전덤프를 제공해드립니다. 최고품질 644-068시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기