ITExamDump의 Altiris인증 60-DSFA680시험덤프는 실제시험의 기출문제와 예상문제를 묶어둔 공부자료로서 시험문제커버율이 상당히 높습니다.IT업계에 계속 종사하려는 IT인사들은 부단히 유력한 자격증을 취득하고 자신의 자리를 보존해야 합니다. ITExamDump의 Altiris인증 60-DSFA680시험덤프로 어려운 Altiris인증 60-DSFA680시험을 쉽게 패스해보세요. IT자격증 취득이 여느때보다 여느일보다 쉬워져 자격증을 많이 따는 꿈을 실현해드립니다.
Altiris인증 60-DSFA680시험이 너무 어려워 보여서 오르지못할 산처럼 보이시나요? 그건ITExamDump의 Altiris인증 60-DSFA680시험문제에 대비하여 제작한Altiris인증 60-DSFA680덤프가 있다는 것을 모르고 있기때문입니다. Altiris인증 60-DSFA680시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 Altiris인증 60-DSFA680덤프로 시험공부를 해보세요.시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다.
ITExamDump 는 여러분의 it전문가 꿈을 이루어드리는 사이트 입다. ITExamDump는 여러분이 우리 자료로 관심 가는 인중시험에 응시하여 안전하게 자격증을 취득할 수 있도록 도와드립니다. 아직도Altiris 60-DSFA680인증시험으로 고민하시고 계십니까?Altiris 60-DSFA680인증시험가이드를 사용하실 생각은 없나요? ITExamDump는 여러분에 편리를 드릴 수 잇습니다. ITExamDump의 자료는 시험대비최고의 덤프로 시험패스는 문제없습니다. ITExamDump의 각종인증시험자료는 모두기출문제와 같은 것으로 덤프보고 시험패스는 문제없습니다. ITExamDump의 퍼펙트한 덤프인 M crosoft60-DSFA680인증시험자료의 문제와 답만 열심히 공부하면 여러분은 완전 안전히Altiris 60-DSFA680인증자격증을 취득하실 수 있습니다.
취직을 원하시나요? 승진을 원하시나요? 연봉인상을 원하시나요? 무엇을 원하시든 국제적으로 인정받은 IT인증자격증을 취득하는것이 길입니다. Altiris인증 60-DSFA680시험은 널리 인정받는 인기자격증의 시험과목입니다. Altiris인증 60-DSFA680시험을 패스하여 자격증을 취득하면 소원이 이루어집니다. ITExamDump의Altiris인증 60-DSFA680덤프는 시험패스율이 높아Altiris인증 60-DSFA680시험준비에 딱 좋은 공부자료입니다. ITExamDump에서 덤프를 마련하여 자격증취득에 도전하여 인생을 바꿔보세요.
시험 번호/코드: 60-DSFA680
시험 이름: Altiris (Altiris Deployment Solution Foundation 6.8)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 99 문항
업데이트: 2013-11-20
60-DSFA680 덤프무료샘플다운로드하기: http://www.itexamdump.com/60-DSFA680.html
NO.1 How does a Deployment Solution job let you work with software virtualization layers? (Choose two.)
A. layers can be imported to a managed computer
B. layers can be created
C. the state of a layer can be managed (activated, deactivated, and so forth)
D. the content of a layer can be modified
Answer: AC
Altiris자료 60-DSFA680덤프 60-DSFA680최신덤프 60-DSFA680
NO.2 You have deployed a hardware independent image to an ACPI Uniprocessor computer and now the
computer will not start.
What is the probable cause?
A. the wrong hardware abstraction layer (HAL) was deployed
B. Sysprep was not run on the source computer
C. the ACPI Uniprocessor computer does not support hardware independent images
D. a clean Windows installation was not performed on the source computer before creating the hardware
independent image.
Answer: A
Altiris자료 60-DSFA680 60-DSFA680 60-DSFA680
NO.3 AClient has not been password protected.
Which three tasks can be performed after right-clicking on the AClient icon from a managed computer?
(Choose three.)
A. initiate Microsoft's Sysprep Utility in preparation for imaging
B. view the AClient log file when log files have been enabled
C. change the name of the managed computer as it appears in the Deployment Console
D. change the NetBIOS name of the managed computer
E. monitor AClient's communication with the Deployment Server
F. reinstall AClient
G. edit the AClient template file
Answer: BCE
Altiris 60-DSFA680 60-DSFA680자료 60-DSFA680
NO.4 When capturing a computer's personality, the application settings used for this process are located in
which file type?
A. .INI
B. .A2I
C. .ASI
D. .PBT
Answer: B
Altiris 60-DSFA680 60-DSFA680자격증 60-DSFA680 60-DSFA680
NO.5 Which Deployment Console method lets you work with software virtualization layers?
A. using a Deployment job
B. selecting Tools > Software Virtualization
C. right-clicking on a computer and selecting Software Virtualization > Manage Layers
Answer: A
Altiris기출문제 60-DSFA680인증 60-DSFA680
NO.6 Which utility removes the security ID (SID) before making an image of a computer?
A. SIDgenerator
B. SetupCapture
C. Sysprep
D. ImageExplorer
E. SIDconfig
Answer: C
Altiris 60-DSFA680 60-DSFA680덤프 60-DSFA680 60-DSFA680
NO.7 Deployment Agents (such as AClient) can be installed on remote computers using the Remote Agent
Installer, but only when the remote computers are running which four operating systems? (Choose four.)
A. Windows 2000
B. Windows 95
C. Windows NT
D. Windows XP
E. Windows 2003
F. Linux
G. Windows 98
Answer: ACDE
Altiris기출문제 60-DSFA680기출문제 60-DSFA680자료 60-DSFA680
NO.8 Which required symbol identifies the opening and closing of a Deployment token?
A. %
B. #
C. $
D. *
Answer: A
Altiris 60-DSFA680 60-DSFA680시험문제 60-DSFA680 60-DSFA680 60-DSFA680 dump
NO.9 When using the DOS operating system, image files with an .EXE file extension _____?
A. cannot be deployed using a Deployment job
B. must be converted to .IMG before they can be deployed with a Deployment job
C. cannot be converted to .IMG files
D. can be deployed without using additional Altiris imaging software
Answer: D
Altiris최신덤프 60-DSFA680 60-DSFA680 60-DSFA680 60-DSFA680
NO.10 You can use _____ to ensure that your PXE servers are servicing the correct managed computers.
A. IP blocking
B. Conditions
C. MAC filtering
D. NetBIOS name recognition
Answer: C
Altiris덤프 60-DSFA680 60-DSFA680최신덤프 60-DSFA680 60-DSFA680 dumps
NO.11 Which Altiris utility creates the necessary media to run the Initial Deployment job from a CD?
A. ImageExplorer
B. RapiDeploy
C. PXE Configuration Utility
D. Initial Deployment Configuration Utility
E. Boot Disk Creator
Answer: E
Altiris최신덤프 60-DSFA680 60-DSFA680최신덤프 60-DSFA680 60-DSFA680
NO.12 Which statement about deploying computer image files is true?
A. The RDeploy switch used to preserve existing partitions is enabled by default.
B. Aborting the deployment process (after imaging as started) corrupts the destination computer's hard
drive.
C. The maximum space required on the destination hard drive is equal to the size of the image file.
D. The imaging process is non-destructive, and adds data to what is already stored on an existing hard
drive partition.
Answer: B
Altiris pdf 60-DSFA680 dump 60-DSFA680덤프 60-DSFA680
NO.13 AClient has been installed on your Windows XP managed computers.
Which three methods can be used to change the settings AClient is currently using? (Choose three.)
A. from the Deployment Console, right-click on the computer and select Change Agent Settings
B. from the Deployment Console, select Tools > AClient > Configurations
C. from the managed computer, select Start > All Programs > Altiris > AClient > Configuration
D. from the managed computer, double-click the AClient icon located in the system tray and select
Properties
E. from the Deployment Console, double-click on a computer and edit the client properties
F. use the Deployment Console to reinstall AClient with the desired settings
Answer: ADF
Altiris자격증 60-DSFA680인증 60-DSFA680 60-DSFA680 60-DSFA680 60-DSFA680
NO.14 Which program lets you edit image files after they have been created?
A. ImgViewer
B. ImageExplorer
C. ImageEditor
D. ImageManager
E. ImgManager
Answer: B
Altiris인증 60-DSFA680인증 60-DSFA680
NO.15 Deployment Solution's Simple Install Helper will check for and install which required third-party
software? (Choose two.)
A. Java
B. DirectX
C. ActiveX
D. .NET framework
E. Pre-boot automation operating systems
F. SQL
Answer: DF
Altiris 60-DSFA680 60-DSFA680자료 60-DSFA680최신덤프 60-DSFA680
NO.16 Which Deployment Solution component stores the main Deployment System program files?
A. Deployment Server
B. Deployment Database
C. Deployment Share
D. Microsoft DHCP Server
E. Deployment PXE Server
F. Deployment Console
Answer: C
Altiris 60-DSFA680자료 60-DSFA680기출문제
NO.17 When using Altiris PXE servers in a Deployment System, which PXE statement is true?
A. Multiple PXE servers can only be installed if a router separates them.
B. If a PXE server is configured to delay its response, it will respond only if no other PXE server responds
immediately.
C. A managed computer only uses the first PXE server it hears from.
D. Configuring multiple PXE servers to respond immediately causes errors on the managed computers.
Answer: C
Altiris 60-DSFA680 60-DSFA680
NO.18 You are using the Deployment Console's New Job Wizard to migrate a computer's personality from
one computer to different computer.
What happens to the names of these two computers during this process?
A. The destination computer is automatically given a new unique name.
B. The source computer is automatically renamed and the destination computer gets the original name of
the source computer.
C. The two computers will end up with identical names, therefore you must rename one of the computers
manually.
Answer: B
Altiris기출문제 60-DSFA680 60-DSFA680시험문제
NO.19 AClient (on a managed computer) has been configured to use a multicast packet to locate the
Deployment Server.
Which statement is now true?
A. moving this computer to a different Deployment System requires the AClient agent be reconfigured
B. images can be sent using unicast packets or multicast packets
C. this setting configures images to be sent to the computer using multicasting technology
D. the Deployment Server must be configured to obtain its IP address from a DHCP server
Answer: B
Altiris 60-DSFA680자료 60-DSFA680 60-DSFA680자료 60-DSFA680
NO.20 While imaging computers, Deployment Solution supports the use of UNDI drivers.
Which UNDI driver statements are true? (Choose two.)
A. UNDI drivers are written specifically to work with the Altiris automation process.
B. UNDI drivers must be downloaded and installed from Intel's Web site before they can be used.
C. UNDI drivers let you image computers without obtaining a specific manufacturer's network driver for
each network card.
D. UNDI drivers do not support multicasting of hard disk images across the entire network.
E. UNDI drivers support multicasting of hard disk images across the entire network.
Answer: CD
Altiris 60-DSFA680 pdf 60-DSFA680 60-DSFA680최신덤프 60-DSFA680덤프
ITexamdump의 3I0-012덤프의 VCE테스트프로그램과 1Z0-061덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 3107시험에 대비한 고품질 덤프와 1z0-465시험 최신버전덤프를 제공해드립니다. 최고품질 MB6-700시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기