ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다. ITExamDump 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거의 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 ITExamDump 는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서 우리만의 이미지를 지키고 있습니다. ITExamDump 는 정확한 문제와 답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록 합니다.
만약 여러분은EMC E20-361인증시험취득으로 이 치열한 IT업계경쟁 속에서 자기만의 자리를 잡고, 스펙을 쌓고, 전문적인 지식을 높이고 싶으십니까? 하지만EMC E20-361패스는 쉬운 일은 아닙니다.EMC E20-361패스는 여러분이 IT업계에 한발작 더 가까워졌다는 뜻이죠. 하지만 이렇게 중요한 시험이라고 많은 시간과 정력을 낭비할필요는 없습니다. ITExamDump의 완벽한 자료만으로도 가능합니다. ITExamDump의 덤프들은 모두 전문적으로 IT관련인증시험에 대하여 연구하여 만들어진것이기 때문입니다.
ITExamDump의 EMC E20-361덤프를 구매하기전 우선 pdf버전 덤프샘플을 다운받아 덤프문제를 공부해보시면ITExamDump덤프품질에 신뢰가 느껴질것입니다. ITExamDump의 EMC E20-361덤프가 고객님의 시험패스테 조금이나마 도움이 되신다면 행복으로 느끼겠습니다.
네트웨크시대인 지금 인터넷에 검색하면 수많은EMC인증 E20-361시험공부자료가 검색되는데 그중에서도ITExamDump에서 출시한 EMC인증 E20-361덤프가 가장 높은 인지도를 지니고 있습니다. EMC인증 E20-361덤프에는EMC인증 E20-361시험문제의 기출문제와 예상문제가 수록되어있어 덤프에 있는 문제만 잘 공부하시면 시험은 가볍게 패스가능합니다. EMC인증 E20-361시험을 통과하여 자겨증취득하는 꿈에 더욱 가까이 다가가세요.
EMC인증 E20-361시험을 패스하여 자격증을 취득하시면 찬란한 미래가 찾아올것입니다. EMC인증 E20-361인증시험을 패스하여 취득한 자격증은 IT인사로서의 능력을 증명해주며 IT업계에 종사하는 일원으로서의 자존심입니다. ITExamDump 의 EMC인증 E20-361덤프는 시험패스에 초점을 맞추어 제일 간단한 방법으로 시험을 패스하도록 밀어주는 시험공부가이드입니다.구매전EMC인증 E20-361무료샘플을 다운받아 적성에 맞는지 확인하고 구매할지 않할지 선택하시면 됩니다.
시험 번호/코드: E20-361
시험 이름: EMC (Network Attached Storage (NAS) Implementation Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 319 문항
업데이트: 2013-10-23
EMC인증사에서 주췌하는 E20-361시험은 IT업계에 종사하는 분이시라면 모두 패스하여 자격증을 취득하고 싶으리라 믿습니다. ITExamDump에서는 여러분이 IT인증자격증을 편하게 취득할수 있게 도와드리는 IT자격증시험대비시험자료를 제공해드리는 전문 사이트입니다. ITExamDump덤프로 자격증취득의 꿈을 이루세요.
E20-361 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-361.html
NO.1 How does the Control Station access disk partitions on the back-end storage?
A.FC
B.NBS
C.iFCP
D.iSCSI
Answer:B
EMC E20-361 E20-361 E20-361최신덤프
NO.2 What application provides integration between the Celerra and the iSCSI host for replicating an iSCSI
LUN?
A.Replication Manager
B.Unisphere Manager
C.Navisphere Manager
D.Celerra Manager
Answer:D
EMC최신덤프 E20-361덤프 E20-361자격증 E20-361 dumps E20-361기출문제
NO.3 ile systems created for iSCSI LUNs should be large enough to accommodate which objects?
A.iSCSI LUNs and NFS
B.iSCSI LUNs and snaps
C.iSCSI LUNs
D.iSCSI LUNs and CIFS
Answer:B
EMC pdf E20-361 E20-361 E20-361
NO.4 You have decided to use the Automatic SavVol Extension. For a Celerra of 200 GB a SavVol with 20
GB is created.
What is the size of the next Automatic SavVol Extension when HWM is reached?
A.20 GB
B.20 MB
C.64 MB
D.64 GB
Answer:A
EMC자격증 E20-361 dump E20-361 E20-361최신덤프
NO.5 An administrator wants to present several CIFS shares to users through one file server. The shares are
stored on many physical machines. What can be used with the Celerra to achieve this goal?
A.Celerra global CIFS server
B.Default CIFS server
C.Distributed File System
D.Virtual Data Mover
Answer:C
EMC덤프 E20-361 pdf E20-361최신덤프 E20-361
NO.6 How is Kerberos used within the Active Directory?
A.For user authentication
B.Provides encryption of stored user passwords
C.For time synchronization
D.Provides Dynamic DNS updates
Answer:A
EMC E20-361최신덤프 E20-361 dump
NO.7 You are implementing a CIFS solution and will possibly be using Virtual Data Movers. Which CIFS
dynamic configuration information is contained within the Virtual Data Mover?
A.Virus checker configuration
B.CIFS startup configuration
C.DFS root ID information
D.Share information
Answer:D
EMC인증 E20-361 E20-361 E20-361
NO.8 You just created a new file system and exported it as an NFS export. You are informed that someone
deleted the .etc configuration directory.
What would be the best way to prevent this in the future?
A.Remove write permission on the .etc directory.
B.Export a subdirectory of the root file system.
C.Educate users about deleting system directories.
D.Set the hidden attribute on the root directory.
Answer:B
EMC자료 E20-361 dumps E20-361시험문제
NO.9 What is the default result of joining a CIFS server to a Windows Active Directory domain?
A.The CIFS server shares are dynamically updated in DNS.
B.The CIFS server interface is dynamically assigned from Active Directory.
C.The "EMC Celerra" container is created in Active Directory.
D.The CIFS server is added to the Active Directory Computers container.
Answer:C
EMC E20-361 E20-361자료 E20-361 dumps
NO.10 A user needs to test new software with existing data stored on a Celerra file system that has
checkpoints. The Celerra administrator is asked to mount a SnapSure checkpoint from the file system to a
different Data Mover.
Can the administrator fulfill this request? Why or why not?
A.Yes, but only if the checkpoint is mounted read-only
B.Yes, but the checkpoint cannot be restored to the PFS
C.No, because the checkpoint relies on the PFS
D.No, because a writeable snap is required for testing
Answer:C
EMC최신덤프 E20-361 E20-361최신덤프 E20-361 E20-361 E20-361자격증
NO.11 The storage administrator would like to know if more AV servers are necessary for optimal
performance and protection.
Which tool can the system administrator use to analyze current utilization of the antivirus environment?
A.CAVA Calculator
B.NAS Support Matrix
C.CAVA Sizing Tool
D.Celerra Monitor
Answer:C
EMC E20-361 E20-361
NO.12 Which Celerra feature stores Windows SIDs correlated to UIDs and GIDs?
A.ntxmap
B.NASDB
C.secmap
D.SavVol
Answer:C
EMC자격증 E20-361 E20-361자료 E20-361최신덤프
NO.13 You have moved a VDM from one Data Mover to another. Now the users cannot access the data. What
could cause this condition?
A.Interface names are different to the source VDM.
B.The IP address on the target Data Mover is set before the move.
C.Target Data Mover sees all file systems of the source VDM.
D.You keep the same IP addresses.
Answer:A
EMC자료 E20-361 dumps E20-361 dumps E20-361인증 E20-361덤프
NO.14 Which Celerra Data Mover file controls both the services used for name resolution and the order in
which they are used?
A.nsswitch.conf
B.nslookup.conf
C.hosts.conf
D.resolv.conf
Answer:A
EMC E20-361 pdf E20-361 E20-361시험문제 E20-361 E20-361 dumps
NO.15 Which describes how a Usermapper client resolves a Windows SID to UNIX UID/GID?
A.Uses the resolution order defined in the Data Mover nsswitch.conf file
B.Broadcasts over the internal Celerra network for secmap cache on server_2
C.Uses the ntxmap.conf file first, then the Data Mover secmap cache
D.Broadcasts over the internal Celerra network for a primary or secondary Usermapper service
Answer:D
EMC pdf E20-361 E20-361자격증 E20-361자격증
NO.16 Which statement describes Celerra gateway Fibre Channel connectivity between the blades and the
back-end storage?
A.CLARiiON back-end storage can only be connected to blades via direct connection.
B.Symmetrix back-end storage can only be connected to blades via direct
C.Symmetrix back-end storage can only be connected to blades via switched fabric.
D.CLARiiON back-end storage can only be connected to blades via switched fabric.
Answer:C
EMC E20-361덤프 E20-361최신덤프
NO.17 You are implementing a Celerra CIFS solution. When discussing the mapping method choices, the site
administrator asks you to explain the significance of the user mapping method for CIFS users.
How do you respond to the site administrator?
A.CIFS servers that join the Windows domain are assigned domain SIDs. The mapping method is used to
uniquely identify the CIFS servers in the Windows AD domain to UNIX NFS servicers in the NIS domain.
B.Celerra has a UxFS-based file system that requires UNIX style UIDs and GIDs for file and directory
permissions. Windows users and groups are identified with SIDs. The mapping method correlates UNIX
UIDs and GIDs to Windows SIDs for uniquely identifying users.
C.Celerra has a UxFS-based file system that stores UNIX style UIDs and GIDs and Windows SIDs for file
and directory permissions. The mapping method correlates the SIDs for local group permissions on the
CIFS server shares.
D.Stand-alone CIFS servers require a manual SID assignment when configured on a Celerra. When
users from the Windows domain access the Celerra the mapping method correlates the stand-alone CIFS
server SID with the Windows user SIDs.
Answer:B
EMC E20-361덤프 E20-361
NO.18 File systems created for iSCSI LUNs should be large enough to accommodate which objects?
A.iSCSI LUNs and NFS
B.iSCSI LUNs and snaps
C.iSCSI LUNs and CIFS
D.iSCSI LUNs
Answer:B
EMC dump E20-361기출문제 E20-361 dump E20-361시험문제
NO.19 Which component of SnapSure identifies changed data blocks in the production file system?
A.Bitmap
B.Blockmap
C.Superblock
D.Inode
Answer:A
EMC E20-361 E20-361
NO.20 A Celerra file system has a SnapSure schedule enabled for daily checkpoints. By using the Microsoft
Shadow Copy Client, a user can see previous versions of a certain file up to a certain date in the past, but
nothing else after that.
What could be the cause of this issue?
A.Checkpoints are currently being used by an application.
B.All of the checkpoints have been refreshed.
C.There have been no changes to the file.
D.The SavVol has reached a full state.
Answer:D
EMC pdf E20-361 E20-361 E20-361 E20-361 dump
ITexamdump의 000-955덤프의 VCE테스트프로그램과 000-614덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1Z1-536시험에 대비한 고품질 덤프와 JN0-633시험 최신버전덤프를 제공해드립니다. 최고품질 1Z0-511시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기