2013년 9월 2일 월요일

JN0-343 시험문제 덤프 Juniper 자격증

ITExamDump 의 Juniper인증 JN0-343덤프는 PDF버전과 소프트웨어버전 두가지 버전으로 되어있는데 소프트웨어버전은 시뮬레이션버전입니다. 소프트웨어버전의 문제를 푸는 과정은 시험현장을 연상케하여 시험환경에 먼저 적응하여 실제시험에서 높은 점수를 받도록 도와드릴수 있습니다.

ITExamDump의Juniper인증 JN0-343 덤프는 수많은 시험준비 공부자료 중 가장 믿음직합니다. ITExamDump의 인지도는 업계에 널리 알려져 있습니다. Juniper인증 JN0-343덤프로Juniper인증 JN0-343시험을 준비하여 한방에 시험패스한 분이 너무나도 많습니다. Juniper인증 JN0-343덤프는 실제Juniper인증 JN0-343시험문제에 초점을 맞추어 제작한 최신버전 덤프로서 시험패스율이 100%에 달합니다.

최근 Juniper인증 JN0-343시험이 IT업계에서 제일 높은 인지도를 가지고 있습니다.바라만 보지 마시고Juniper인증 JN0-343시험에 도전해보세요. ITExamDump 의 Juniper인증 JN0-343덤프로 시험준비공부를 하시면 한방에 시험패스 가능합니다. Juniper인증 JN0-343덤프로 자격증취득에 가까워지고 나아가서는 IT업계에서 인정을 받는 열쇠를 소유한것과 같다고 할수 있습니다.

시험 번호/코드: JN0-343
시험 이름: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-ENT))

Juniper인증 JN0-343시험준비중이신 분들은Juniper인증 JN0-343시험통과가 많이 어렵다는것을 알고 있을것입니다. 학교공부하랴,회사다니랴 자격증공부까지 하려면 너무 많은 정력과 시간이 필요할것입니다. 그렇다고 자격증공부를 포기하면 자신의 위치를 찾기가 힘들것입니다. ITExamDump 덤프는 IT인증시험을 대비하여 제작된것이므로 시험적중율이 높아 다른 시험대비공부자료보다 많이 유용하기에 IT자격증을 취득하는데 좋은 동반자가 되어드릴수 있습니다. ITExamDump 덤프를 사용해보신 분들의 시험성적을 통계한 결과 시험통과율이 거의 100%에 가깝다는 놀라운 결과를 얻었습니다.

JN0-343 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-343.html

NO.1 What is the correct sequence of OSPF adjacency formation?
A. Down, Init, ExStart, 2way, Loading, Exchange, Full
B. Down, 2way, Init, ExStart, Exchange, Loading, Full
C. Down, Init, 2way, ExStart, Exchange, Loading, Full
D. Down, Init, 2way, Loading, ExStart, Exchange, Full
Answer: C

Juniper   JN0-343   JN0-343시험문제   JN0-343 pdf

NO.2 Which of the following can be used for both security and loop prevention?
A. firewall filters
B. DHCP snooping
C. dynamic ARP inspection D. MAC move limiting
Answer: D

Juniper   JN0-343   JN0-343   JN0-343최신덤프

NO.3 Which configuration summarizes external routes in the 172.16.0.0/22 range into a single prefix on an
ABR for Area 1?
A. protocols { ospf { area 0.0.0.1 {
nssa {
default-lsa {
default-metric 1;
metric-type 1;
}
}
area-range 172.16.0.0/22;
}
}
}
B. protocols {
ospf {
area 0.0.0.1 {
nssa {
area-range 172.16.0.0/22;
}
}
}
}
C. protocols {
ospf {
area 0.0.0.1 {
stub summaries;
}
}
}
D. protocols {
ospf {
area 0.0.0.1 {
nssa;
area-range 172.16.0.0/22 restrict;
}
}
}
Answer: B

Juniper   JN0-343기출문제   JN0-343 dumps   JN0-343기출문제   JN0-343기출문제   JN0-343덤프

NO.4 Which OSPF area type can contain Type 7 LSAs?
A. backbone
B. not-so-stubby
C. stub
D. totally stubby
Answer: B

Juniper   JN0-343   JN0-343   JN0-343

NO.5 Which statements are true about graceful Routing Engines switchover (GRES)?
A. Configuration on both Routing Engines must be synchronized.
B. The backup Routing Engine cannot be managed through IP address because RPD does not run on
backup the Routing Engine.
C. Different hostnames must be configured on both Routing-Engines.
D. Both Routing-Engines are managed through a single out-of-band-management IP address.
Answer: A

Juniper   JN0-343덤프   JN0-343   JN0-343기출문제

NO.6 How much overhead does the GRE header add to an IPv4 packet?
A. 24 bytes
B. 32 bytes
C. 48 bytes
D. 64 bytes
Answer: A

Juniper   JN0-343덤프   JN0-343   JN0-343시험문제   JN0-343자료   JN0-343시험문제

NO.7 In the following output, what does the asterisk indicate?
A. The interface is configured as a trunk.
B. The interface is configured for spanning-tree protocol.
C. The interface is active.
D. The interface is inactive.
Answer: C

Juniper   JN0-343   JN0-343   JN0-343   JN0-343자료   JN0-343

NO.8 Configuring bpdu-timeout-action enables which protection mechanism?
A. root protection
B. BPDU protection
C. loop protection
D. RSTP protection
Answer: C

Juniper pdf   JN0-343자료   JN0-343   JN0-343인증   JN0-343 dumps

NO.9 Given the following output, what has been configured for the 192.168.3.0/24 prefix?
A. per-flow load balancing
B. a floating static route
C. per-packet load balancing
D. a qualified next hop
Answer: A

Juniper dumps   JN0-343   JN0-343자료   JN0-343자격증   JN0-343

NO.10 Which configuration disables a port when more than 30,000 Kbps of broadcast traffic is received over
an aggregated Ethernet interface with two member links?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C

Juniper인증   JN0-343   JN0-343   JN0-343   JN0-343

NO.11 When processing inbound Ethernet frames, which firewall filter is evaluated first by an EX Series
switch?
A. port filter
B. VLAN filter
C. trunk filter
D. route filter
Answer: A

Juniper dumps   JN0-343 dump   JN0-343자료   JN0-343

NO.12 Which configuration correctly sets interface ge-0/0/4 in trunk mode, carrying VLANs v10 and v20?
A. ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members [ v10 v20 ];
}
} } }
B. ge-0/0/4 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
C. ge-0/0/4 {
vlan-tagging;
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
D. ge-0/0/4 {
unit 10 {
family ethernet-switching;
}
unit 20 {
family ethernet-switching;
}
}
Answer: B

Juniper dumps   JN0-343 pdf   JN0-343자료   JN0-343   JN0-343

NO.13 Which BGP attributes are listed in the correct route selection order?
A. local preference, AS path, origin, MED
B. local preference, MED, AS path, origin
C. AS path, local preference, origin, MED
D. MED, origin, local preference, AS path
Answer: A

Juniper   JN0-343   JN0-343   JN0-343   JN0-343   JN0-343

NO.14 An administrator finds that traffic from a large file download over an HTTP session is not load-balanced
across multiple links in a LAG. What is the possible cause?
A. Per-packet load-balancing is not configured.
B. The redundant path has a different IGP metric.
C. The hash key is not configured in the forwarding-options stanza.
D. This is the expected behavior.
Answer: D

Juniper   JN0-343   JN0-343 pdf

NO.15 Which Junos command correctly configures the ge-0/0/0.0 interface to operate only for IS-IS Level 2?
A. set interfaces ge-0/0/0.0 family iso level 2 enable
B. set interfaces ge-0/0/0.0 family iso level 1 disable
C. set protocols isis interface ge-0/0/0.0 level 2 enable
D. set protocols isis interface ge-0/0/0.0 level 1 disable
Answer: D

Juniper기출문제   JN0-343자료   JN0-343   JN0-343   JN0-343

NO.16 Which of the following is enabled by default on an EX Series switch?
A. MAC move limiting
B. storm control
C. IP source guard
D. dynamic ARP inspection
Answer: B

Juniper   JN0-343   JN0-343   JN0-343   JN0-343자격증   JN0-343

NO.17 What are two valid BPDU types? (Choose two.)
A. topology change notification
B. configuration change
C. configuration
D. root bridge
Answer: A,C

Juniper   JN0-343 dump   JN0-343최신덤프   JN0-343 pdf   JN0-343인증   JN0-343 pdf

NO.18 Click the Exhibit button.
Based on the exhibit, in which spanning-tree state would the indicated port be.?
A. listening
B. learning
C. forwarding
D. blocking
Answer: C

Juniper   JN0-343   JN0-343기출문제   JN0-343   JN0-343시험문제

NO.19 Which two of the following are functions of the BGP update message? (Choose two.)
A. It withdraws routes that are no longer valid.
B. It notes that an unsupported option is detected from the open message.
C. It transports routing information between BGP peers.
D. It readvertises routes that have already been sent and acknowledged.
Answer: A,C

Juniper dump   JN0-343   JN0-343시험문제

NO.20 Which two OSPF LSA types can be used to advertise routes between areas? (Choose two.)
A. router
B. network
C. external
D. summary
Answer: C,D

Juniper   JN0-343   JN0-343   JN0-343   JN0-343   JN0-343

NO.21 When loop protection is enabled on an interface, what happens when the port stops receiving BPDUs?
A. The port is placed in a loop-inconsistent role.
B. The port is placed into listening mode.
C. The port is transitioned into a forwarding state.
D. The interface is disabled.
Answer: A

Juniper시험문제   JN0-343   JN0-343인증

NO.22 Which protocol is an IGP?
A. LACP
B. STP
C. OSPF
D. PAGP
Answer: B

Juniper시험문제   JN0-343기출문제   JN0-343자료   JN0-343 dump

NO.23 What is the default behavior of a trunk port when it receives transit traffic without a VLAN tag?
A. It drops the traffic.
B. It forwards the traffic.
C. It tags the transit traffic with lowest VLAN ID permitted on the trunk.
D. It tags the transit traffic with highest VLAN ID permitted on the trunk.
Answer: A

Juniper   JN0-343 pdf   JN0-343   JN0-343인증

NO.24 Which command correctly assigns AS 65432 as the local router's autonomous system?
A. set protocols bgp local-as 65432
B. set routing-options local-as 65432
C. set protocols bgp autonomous-system 65432
D. set routing-options autonomous-system 65432
Answer: D

Juniper dumps   JN0-343   JN0-343   JN0-343자격증   JN0-343

NO.25 Which statement describes the default Junos OS behavior for OSPF?
A. External LSAs are advertised in a stub area.
B. An ABR does not announce a default route into a stub area.
C. Stub area internal routers generate a default route.
D. Only totally stubby areas need a default route.
Answer: B

Juniper   JN0-343   JN0-343 pdf   JN0-343최신덤프   JN0-343

NO.26 Which OSPF LSA type is sent by all routers in an area to advertise its connected subnets?
A. router
B. network
C. external
D. summary
Answer: A

Juniper   JN0-343자료   JN0-343인증   JN0-343

NO.27 Which two pieces of information are communicated by IS-IS TLVs? (Choose two.)
A. network protocols supported
B. designated router priority
C. authentication key
D. PDU Length
Answer: A,C

Juniper pdf   JN0-343덤프   JN0-343

NO.28 Which routing-instance type allows the sharing of interface routes and the support features used in
source-based routing?
A. virtual-router
B. vrf
C. forwarding
D. multi-instance
Answer: C

Juniper자격증   JN0-343   JN0-343최신덤프

NO.29 Which three statements correctly describe the default BGP advertisement behavior in the Junos OS?
(Choose three.)
A. Routes learned through EBGP are advertised to IBGP peers.
B. Routes learned through EBGP are advertised to other EBGP peers.
C. Routes learned through IBGP are advertised to other IBGP peers.
D. Routes learned through IBGP will be advertised to EBGP peers.
E. Routes learned through an IGP are automatically advertised to EBGP peers.
Answer: A,B,D

Juniper자료   JN0-343   JN0-343덤프   JN0-343   JN0-343

NO.30 What is the minimum configuration necessary to create two VLANs and two operational RVIs?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B

Juniper dump   JN0-343덤프   JN0-343   JN0-343자격증   JN0-343

ITExamDump의Juniper인증 JN0-343덤프는 시험패스율이 거의 100%에 달하여 많은 사랑을 받아왔습니다. 저희 사이트에서 처음 구매하는 분이라면 덤프풀질에 의문이 갈것입니다. 여러분이 신뢰가 생길수 있도록ITExamDump에서는Juniper인증 JN0-343덤프구매 사이트에 무료샘플을 설치해두었습니다.무료샘플에는 5개이상의 문제가 있는데 구매하지 않으셔도 공부가 됩니다. Juniper인증 JN0-343덤프로Juniper인증 JN0-343시험을 준비하여 한방에 시험패하세요.

댓글 없음:

댓글 쓰기