우리ITExamDump의 덤프는 여러분이IBM 000-834인증시험응시에 도움이 되시라고 제공되는 것입니다, 우라ITExamDump에서 제공되는 학습가이드에는IBM 000-834인증시험관연 정보기술로 여러분이 이 분야의 지식 장악에 많은 도움이 될 것이며 또한 아주 정확한IBM 000-834시험문제와 답으로 여러분은 한번에 안전하게 시험을 패스하실 수 있습니다,IBM 000-834인증시험을 아주 높은 점수로 패스할 것을 보장해 드립니다,
IBM 인증 000-834시험대비덤프를 찾고 계시다면ITExamDump가 제일 좋은 선택입니다.저희ITExamDump에서는 여라가지 IT자격증시험에 대비하여 모든 과목의 시험대비 자료를 발췌하였습니다. ITExamDump에서 시험대비덤프자료를 구입하시면 시험불합격시 덤프비용환불신청이 가능하고 덤프 1년 무료 업데이트서비스도 가능합니다. ITExamDump를 선택하시면 후회하지 않을것입니다.
시험 번호/코드: 000-834
시험 이름: IBM (Object Oriented Analysis and Design-Part2(Design))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 68 문항
업데이트: 2013-09-15
IBM 000-834인증시험은 현재IT업계에서 아주 인기 있는 시험입니다.많은 IT인사들이 관연 자격증을 취득하려고 노력하고 있습니다.IBM 000-834인증시험에 대한 열기는 식지 않습니다.IBM 000-834자격증은 여러분의 사회생활에 많은 도움이 될 것이며 연봉상승 등 생활보장에 업그레이드 될 것입니다.
ITExamDump의 IBM인증 000-834시험덤프는 실제시험의 기출문제와 예상문제를 묶어둔 공부자료로서 시험문제커버율이 상당히 높습니다.IT업계에 계속 종사하려는 IT인사들은 부단히 유력한 자격증을 취득하고 자신의 자리를 보존해야 합니다. ITExamDump의 IBM인증 000-834시험덤프로 어려운 IBM인증 000-834시험을 쉽게 패스해보세요. IT자격증 취득이 여느때보다 여느일보다 쉬워져 자격증을 많이 따는 꿈을 실현해드립니다.
000-834 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-834.html
NO.1 What is a gate?
A. a parameter that represents a message that crosses the boundary of an interaction or interaction
fragment
B. a defined protocol for accessing the internals of a subsystem
C. a decision point in a state machine that has more than two alternatives
D. a set of checkpoints each subsystem design must satisfy before it can be assigned for implementation
Answer: A
IBM 000-834인증 000-834인증
NO.2 When identifying design elements, a simple analysis class will map to a(n)_____.
A. active class
B. interface
C. design class
D. subsystem
Answer: C
IBM dumps 000-834 000-834 dumps 000-834 000-834시험문제
NO.3 In which OOAD activity is the distribution mechanism identified?
A. Identify Design Elements
B. Identify Design Mechanisms
C. Class Design
D. Architectural Analysis
Answer: B
IBM 000-834자료 000-834자료 000-834 dumps
NO.4 Given the following configuration: Package A, which contains class aClass is in the presentation layer.
Package B, which contains a class bClass and an interface bInterface is in the business layer. Package C,
which contains cClass is in the data layer. Which is a poor practice?
A. aClass calls a method in bClass.
B. aClass has an attribute of type cClass.
C. aClass realizes bInterface.
D. bClass realizes bInterface.
Answer: B
IBM자격증 000-834자료 000-834 000-834자료
NO.5 A design mechanism _____.
A. captures the key aspects of a solution in a way that is implementation-independent
B. specifies the exact implementation of the mechanism and is bound to a certain technology,
implementation language, or vendor
C. is the same as a design pattern
D. assumes some details of the implementation environment, but is not tied to a specific implementation
Answer: D
IBM dump 000-834 000-834
NO.6 When identifying interfaces during the Identify Design Elements activity, which statement is true?
A. Classes should not realize an interface.
B. Each subsystem realizes only one interface.
C. Interfaces should be identified before subsystems are created.
D. Interfaces should be packaged separately from the elements that realize them.
Answer: D
IBM자료 000-834최신덤프 000-834
This document was created with Win2PDF available at http://www.win2pdf.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
This page will not be added after purchasing Win2PDF.
NO.7 Which statement is true about design subsystems?
A. They partially encapsulate behavior.
B. They represent an independent capability with clear interfaces.
C. They model a single implementation variant.
D. They can only contain design classes.
Answer: B
IBM최신덤프 000-834 000-834인증 000-834
NO.8 Which is an input artifact to the Identify Design Elements activity?
A. Deployment Model
B. Implementation Model
C. Reference Architecture
D. Software Architecture Document
Answer: D
IBM pdf 000-834인증 000-834인증
NO.9 Which task is performed during use-case realization refinement?
A. identify participating classes
B. allocate responsibilities among classes
C. model messages between classes
D. model associated class relationships
Answer: D
IBM자료 000-834 000-834
NO.10 Why would you use subsystem interfaces rather than subsystem instances on sequence diagrams?
A. to make it easier to model subsystems during Subsystem Design
B. to make use-case realizations easier to change
C. to ease sequence diagram maintenance when message signatures change
D. to reduce the number of classes needed to implement the subsystem
Answer: B
IBM최신덤프 000-834 dumps 000-834
NO.11 What is an important consideration when allocating processes to nodes?
A. minimizing network traffic
B. minimizing power consumption
C. utilizing all available nodes
D. physical distance between nodes
Answer: A
IBM 000-834자료 000-834 000-834자격증
NO.12 What is the relationship between operation and method?
A. The terms are synonymous.
B. An operation describes how a method is implemented.
C. A method describes how an operation is implemented.
D. There is no relationship.
Answer: C
IBM덤프 000-834 pdf 000-834인증 000-834 000-834자료
NO.13 In the state of a state machine, a behavior can be defined _____.
A. before reaching a state
B. upon reaching a state
C. upon leaving a state
D. inside a state
Answer: BCD
IBM dump 000-834 000-834 000-834 000-834 000-834
NO.14 Click on the exhibit button In the diagram, what is E?
A. fork
B. initial state
C. decision
D. transition
E. final state
F. event
G. state
H. guard condition
Answer: H
IBM 000-834 000-834 000-834 000-834 dumps
NO.15 What are the two types of dependency that can be used from a subsystem? (Choose two.)
A. <<uses>> dependency to a subsystem interface
B. an <<import>> dependency to a package containing used classes
C. a <<manifest>> relationship to a node in the Deployment model
D. a <<realize>> relationship to one or more collaboration occurrences
Answer: AB
IBM 000-834기출문제 000-834 000-834자격증
NO.16 Which type of mechanism is a connector on a deployment diagram?
A. backup
B. communication
C. transaction
D. computation
Answer: B
IBM인증 000-834 dumps 000-834 dumps
NO.17 Click on the exhibit button In the diagram, what is H?
A. fork
B. initial state
C. decision
D. transition
E. final state
F. event
G. state
H. guard condition
Answer: A
IBM덤프 000-834 000-834 000-834
NO.18 Identify Design Elements is part of which workflow detail?
A. Define a Candidate Architecture
B. Design Components
C. Perform Architectural
D. Refine the Architecture
Answer: D
IBM 000-834 000-834 000-834인증 000-834
NO.19 Which process document describes design mechanisms, any mappings between design mechanisms,
and the details regarding their use?
A. Software Architecture Document
B. Design Guidelines
C. Vision Document
D. Software Development Plan
Answer: C
IBM 000-834 dump 000-834 dumps
NO.20 Which statement is true about elements within the subsystem and public visibility?
A. Only the subset of elements that define the subsystems API should have public visibility.
B. Only the subsystem proxy class should have public visibility.
C. No elements inside the subsystem should have public visibility.
D. Only the elements that reference external classes should have public visibility.
Answer: C
IBM덤프 000-834 000-834시험문제 000-834
ITexamdump의 312-50v8덤프의 VCE테스트프로그램과 LOT-405덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-467시험에 대비한 고품질 덤프와 MB6-870시험 최신버전덤프를 제공해드립니다. 최고품질 70-487시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기