다른 사이트에서도IBM 000-565인증시험관련 자료를 보셨다고 믿습니다.하지만 우리 ITExamDump의 자료는 차원이 다른 완벽한 자료입니다.100%통과 율은 물론ITExamDump을 선택으로 여러분의 직장생활에 더 낳은 개변을 가져다 드리며 ,또한ITExamDump를 선택으로 여러분은 이미 충분한 시험준비를 하였습니다.우리는 여러분이 한번에 통과하게 도와주고 또 일년무료 업데이트서비스도 드립니다.
최근 IT 업종에 종사하는 분들이 점점 늘어가는 추세하에 경쟁이 점점 치열해지고 있습니다. IT인증시험은 국제에서 인정받는 효력있는 자격증을 취득하는 과정으로서 널리 알려져 있습니다. ITExamDump의 IBM인증 000-565덤프는IT인증시험의 한 과목인 IBM인증 000-565시험에 대비하여 만들어진 시험전 공부자료인데 높은 시험적중율과 친근한 가격으로 많은 사랑을 받고 있습니다.
시험 번호/코드: 000-565
시험 이름: IBM (IBM Tivoli Network Manager IP Edition V3.9 Implementation)
ITExamDump에서 제공하는 제품들은 품질이 아주 좋으며 또 업뎃속도도 아주 빠릅니다 만약 우리가제공하는IBM 000-565인증시험관련 덤프를 구매하신다면IBM 000-565시험은 손쉽게 성공적으로 패스하실 수 있습니다.
우리ITExamDump의 덤프는 여러분이IBM 000-565인증시험응시에 도움이 되시라고 제공되는 것입니다, 우라ITExamDump에서 제공되는 학습가이드에는IBM 000-565인증시험관연 정보기술로 여러분이 이 분야의 지식 장악에 많은 도움이 될 것이며 또한 아주 정확한IBM 000-565시험문제와 답으로 여러분은 한번에 안전하게 시험을 패스하실 수 있습니다,IBM 000-565인증시험을 아주 높은 점수로 패스할 것을 보장해 드립니다,
000-565 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-565.html
NO.1 What is the primary issue with installing IBM Tivoli Network Manager IP Edition V3.9 (ITNM) as a root
user on a single UNIX system in combination with other Tivoli products?
A. The system will not run properly as a root user.
B. ITNM might not be compatible with other Tivoli products.
C. There are no issues related to installing as root on a UNIX system.
D. There are extra post-installation configuration steps to complete in order to run the core components
as the root user.
Answer: B
IBM시험문제 000-565덤프 000-565 000-565
NO.2 A customer wants to add some logic around specific IBM Tivoli Network Manager IP Edition V3.9 poller
generated events. Where would an administrator put this logic?
A. add an exception filter clause to the ncmonitor.noEvent table
B. modify the nco_p_ncpmonitor rules file to include the required logic
C. modify the ncp_poller event generation ruleset to prevent the events from being sent
D. change the EventGatewaySchema.cfg configuration file to prevent the events from reaching the
ObjectServer
Answer: B
IBM dumps 000-565덤프 000-565 000-565인증
NO.3 A custom event has been added requiring the creation of a new EventMap. How is this EventMap
associated with the RCA plug-in?
A. register the EventMap with the RCA plug-in using the ncp_gwplugins.pl script
B. ensure that the Eventld is mapped to the EventMap in the NcoGatelnserts.cfg file
C. edit the EventGatewaySchema.cfg and include the EventMap in the ncp2nco section
D. no action needed - any EventMap in the EventGatewaySchema.cfg file will be passed to the RCA
plug-in by default
Answer: A
IBM 000-565 dumps 000-565자료 000-565
NO.4 During a deployment, a customer has identified location data that they would like added to both
chassis and interface events from active (IBM Tivoli Network Manager IP Edition V3.9 (ITNM)) and
passive (traps, syslog etc.) event sources.
This data has been successfully imported into the Discovery process using supported stitching
techniques and appears in the topology as three custom Extralnfo fields (see below).
Ncpjnode1 has been configured to transfer this location data to a custom extended NCIM database table
named locations (see exhibit below). This data is only held on EntityType 1 (chassis entities) to reduce the
NCIM load.
The customer has identified three ObjectServer fields that they would like this data :o be added to for all
suitable events -NmosGeography, NmosCountry, and NmosSite
Example record in Model Description of the ncim.locations table
The ModelNcimDb cofiguration has been modified to map:
Based on the scenario, what is the correct stitcher method to populate a record with Extralnfo >
m_Geogrpahy location data and then update the NmosGeography ObjectServer field?
Assume that a chassis and locationData Records have been defined and the mainNodeld is set to the
Entityld of the chassis of the in scope event.
Example:
Record chassis;
Record locationData.
text geog-'.
chassis = GwEntityData( mainNodeld);
A. geog=@chassis.tocations.GEOGRAPHY; @locationData.NmosGeography = geog.
GwEnrichEvent( locationData);
B. geog=@chassis.Extralnfo.m_Geography; @locationData.NmosGeography = geog;
GwEnrichEvent(locationData);
C. NmosGeography = eval(text, '&8<Extralnfo->m_Geography'); GwEnrichEvent (NmosGeography);
D. NmosGeogrpahy = @chassis.locations.GEOGRAPHY; @locationData.NmosGeography = eval(text,
'$NmosGeography'); GwEnrichEvent (locationData);
Answer: A
IBM dumps 000-565 dump 000-565
NO.5 In IBM Tivoli Network Manager IP Edition V3.9 what leads to Fatal messages in the message level log
of a ncp process?
A. process is hung
B. process is terminated
C. process has not started
D. process is running with errors
Answer: B
IBM시험문제 000-565 000-565 000-565 000-565
NO.6 The scope of the discovery contains the IBM Tivoli Network Manager IP Edition V3.9 (ITNM) server
and the gateway trace file shows that this is being used successfully as the correct NcpServerEntity.
However, the isolated suppression method is not working. What would cause this?
A. The ITNM server is not being directly polled for status.
B. The ITNM server is not connected to the rest of the topology.
C. There was no SNMP access to the ITNM server so the IP address is not known.
D. The Root Cause Analysis plug-in has not been explicitly configured to use the ITNM server.
Answer: B
IBM 000-565 000-565자격증 000-565 000-565 000-565 dump
NO.7 How can discovery be configured to run at 7:00 p.m. every night?
A. run the script $PRECI`SION_HOME/scripts/perl/scripts/ncp_autodiscovery.pl 1900
B. edit the SPRECISIONJHOMBdisco/stitchers/FullDiscovery.stch file and add in the line within
the StitcherTrigger section:
ActOnDemand(( m_TimeOfDay) values (1900););
C. edit the $PRECISION_HOME/disco/stitchers/FullDiscovery.stch file and add in the line within
the StitcherTrigger section:
ActOnTimedTrigger(( m_TimeOfDay) values (1900););
D. edit the $PRECISION_HOME/disco/stitchers/FullDiscovery stch stitcher and add in the line
within the StitcherRules section:
ActOnDemand(( m_TimeOfDay) values (1900););
Answer: C
IBM 000-565 dump 000-565자격증 000-565
NO.8 Which scenario is suitable for using default adaptive polls?
A. rapid confirmation that the poll is active
B. rapid confirmation that a device is down
C. rapid confirmation of a threshold resolution
D. rapid confirmation that a device is functioning
Answer: B
IBM 000-565 000-565 000-565 000-565
NO.9 The IBM Tivoli Network Manager IP Edition V3.9 administrator received a request to create a new
domain with a default set of configuration files and poll policies. A Dbl_ogins.DOMAIN.cfg file has already
been created with the appropriate access details. Which action must be taken?
A. rundomain_create.pl -domain <DOMAIN>
B. rundomain_create.pl -domain <DOMAIN> -default
C. manually insert the domain details into the ncim.domainMgr table
D. start the ncp_ctrl process for the new domain name - defaults will be applied
Answer: A
IBM 000-565 000-565
NO.10 In IBM Tivoli Network Manager IP Edition V3.9 given a requirement to discover a new node but not
place it in the topology correctly, which two tasks must be performed when doing partial rediscovery?
(Choose two.)
A. ensure the option Network Discovery Configuration > Advanced > Enable Rediscovery Rebuild Layers
is checked
B. ensure the necessary agents are enabled under Network Discovery Configuration > Partial
Rediscovery Agents tab
C. ensure the option Network Discovery Configuration > Advanced > Enable Rediscovery Rebuild Layers
is unchecked
D. ensure the option Network Discovery Configuration > Advanced > Enable Rediscovery of Related
Devices is checked
E. ensure the option Network Discovery Configuration > Advanced > Enable Rediscovery of Related
Devices is unchecked
Answer: B,C
IBM 000-565 pdf 000-565시험문제
NO.11 A company wants to create a new drop-down list that an operator can use when creating new dynamic
network views. The list will hold the customerName and customerLocation information. This information
was collected during the discovery phase and added to the model. The administrator has already
extended the NCIM database with a new table called Customer which has two fields: customerName and
customerLocation. The model has been configured to populate this new table. Which additional step does
the administrator need to take to display the new table in the dropdown list?
A. add this table to the appropriate section in the topoviz.properties
B. modify the ncimMetaDataxml file by adding the appropriate table and data fields
C. modify the DBEntityDetails.cfg file by specifying a new drop-down list and the name of the table
created in the NCIM database
D. no additional step is required as the network view configuration automatically has access to all of the
tables in the NCIM database and will create a drop-down list for each and every table
Answer: B
IBM 000-565시험문제 000-565기출문제 000-565
NO.12 By default, which three fields are used by the event gateway to link an event to a topology entity?
(Choose three.)
A. @Node
B. @Class
C. @bEventld
D. @Identifier
E. @LocalPriObj
F. @LocalNodeAlias
Answer: C,E,F
IBM 000-565 000-565 pdf 000-565자격증
NO.13 Which file contains the SNMP community strings and settings for an IBM Tivoli Network Manager IP
Edition V3.9 (ITNM) domain named ITNM NCP?
A. CtrlServices.ITNM_NCP.cfg
B. SnmpStackSchema.ITNM_NCP.cfg
C. SnmpStackSecuritylnfo.ITNM_NCP.cfg
D. DiscoSnmpHelperSchema.ITNM_NCP.cfg
Answer: C
IBM 000-565자료 000-565자료 000-565덤프
NO.14 If NCIM replication is enabled, which statement is true?
A. Only IBM DB2 can be used for NCIM replication.
B. Two NCIM databases exist, one in the primary domain and one in the backup domain.
C. IBM Tivoli Network Manager IP Edition V3.9 (ITNM) must connect to a pair of virtual ObjectServers.
D. There will only be one ncp_g_event running for all of ITNM.
Answer: B
IBM 000-565 pdf 000-565 000-565 000-565기출문제
NO.15 Which two statements are true about installing IBM Tivoli Network Manager IP Edition V3.9 (ITNMJ on
a Solaris platform? {Choose two.)
A. The ITNM destination directory must be owned as root.
B. If ITNM is installed as a non-root user, all future Tivoli products must be installed as the same user.
C. The setup_setuid_as_root.sh script must be run as root if ITNM is installed and will run as non-root.
D. The setup_setuid_as_root.sh script must be run as non-root if ITNM is installed and will run as
non-root.
E. Multiple ITNM installations on the same server can be installed with both the root account and a
non-root account.
Answer: B,C
IBM시험문제 000-565 000-565기출문제
NO.16 How should an administrator deploy IBM Tivoli Network Manager IP Edition V3.9 using a command line
installation on a Windows system?
A. console_install.exe
B. launchpad_console.exe
C. launchpad.exe -console
D. install.exe -i console
Answer: D
IBM 000-565 000-565기출문제 000-565최신덤프
NO.17 Which restriction is in place when using a silent install mode?
A. The installation process cannot be canceled at any time
B. The silent install file cannot be edited after it has been created.
C. The silent install file cannot be moved between hosts and then reused.
D. The silent install mode is only suitable for a default standard installation
Answer: A
IBM dumps 000-565 000-565시험문제 000-565인증
NO.18 Aside from the number of devices being discovered, what is the most important information to gather
when determining the number of needed domains?
A. number of polling engines
B. number of users that will use the portal
C. average number of interfaces per device
D. number of active poll definitions and intervals
Answer: C
IBM 000-565자료 000-565덤프 000-565 000-565자료 000-565 pdf
NO.19 A customer wants to deploy IBM Tivoli Network Manager IP Edition V3.9 (ITNM) in their environment.
They plan to discover and monitor specific various network devices and servers that are throughout their
enterprise. The customer wants to ensure that they manage only a list of devices in their network with a
specific naming convention. They currently keep track of these devices using a CSV file of IP addresses,
hostnames and locations and have SNMP and ping access to these systems. Currently their DNS server
and SysName naming conventions are not consistent. The customer also wants to ensure that they do
not discover IP addresses outside the CSV list.
Which discovery seeding method best suits their ITNM configuration?
A. configure the Collector Finder by seeding the discovery and converting the CSV file to an XML file
B. configure the Ping Finder by adding a list of subnets from the list of IP addresses using the CSV file
C. configure the File Finder to point to the CSV file on the Network Manager server with a comma
delimiter
D. ensure Feedback is enabled and then configure the Ping Finder and the File Finder by adding a list of
subnets using the CSV file
Answer: C
IBM기출문제 000-565시험문제 000-565 000-565
NO.20 What does this entry do in the DiscoCollectorFinderSeeds.DOMAIN.cfg in IBM Tivoli Network Manager
IP Edition V3.9 (ITNM).?
insert into collectorFinder.collectorRules ( m_Host, m_Port, m_NumRetries ) values ( "172.16.25.1", 8082,
5 ) ;
A. The collector agent running on the ITNM server connects to the EMS running on port 8082 to collect its
data.
B. The collector agent running on the ITNM server connects to the collector running on port 8082 to
collect its data.
C. The collector agent running on 172 16 25 1 connects locally to the collector running on port 8082 to
collect its data.
D. The collector agent running on the ITNM server connects to the collector running on 172.16.25 1 port
8082 to collect its data.
Answer: D
IBM 000-565 000-565 000-565 000-565
많은 사이트에서 IBM인증 000-565시험대비덤프를 제공해드리는데ITExamDump를 최강 추천합니다. ITExamDump의IBM인증 000-565덤프에는 실제시험문제의 기출문제와 예상문제가 수록되어있어 그 품질 하나 끝내줍니다.적중율 좋고 가격저렴한 고품질 덤프는ITExamDump에 있습니다.
댓글 없음:
댓글 쓰기