IBM 000-918 인증시험

ITExamDump의 IBM인증 000-918덤프는 다른 덤프판매 사이트보다 저렴한 가격으로 여러분들께 가볍게 다가갑니다. IBM인증 000-918덤프는 기출문제와 예상문제로 되어있어 시험패스는 시간문제뿐입니다.

ITExamDump의 제품들은 모두 우리만의 거대한IT업계엘리트들로 이루어진 그룹 즉 관련업계예서 권위가 있는 전문가들이 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어냅니다. ITExamDump의 문제와 답은 정확도 적중률이 아주 높습니다. 우리의 덤프로 완벽한IBM인증000-918시험대비를 하시면 되겠습니다. 이렇게 어려운 시험은 우리IBM인증000-918덤프로 여러분의 고민과 꿈을 한방에 해결해드립니다.

ITExamDump는 믿을 수 있는 사이트입니다. IT업계에서는 이미 많이 알려져 있습니다. 그리고 여러분에 신뢰를 드리기 위하여 IBM 인증000-918 관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있게 제공합니다. 아주 만족할 것이라고 믿습니다. ITExamDump제품에 대하여 아주 자신이 있습니다. IBM 인증000-918 도 여러분의 무용지물이 아닌 아주 중요한 자료가 되리라 믿습니다. 여러분께서는 아주 순조로이 시험을 패스하실 수 있을 것입니다.

우리ITExamDump에는 아주 엘리트 한 전문가들로 구성된 팀입니다 그들은 끈임 없는 연구와 자기자신만의 지식으로 많은 IT관연 덤프자료를 만들어 냄으로 여러분의 꿈을 이루어드립니다, 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는IBM 000-918시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. ITExamDump덤프들은 모두 보장하는 덤프들이며 여러분은 과감히 ITExamDump의 덤프를 장바구니에 넣으세요. ITExamDump에서 여러분의 꿈을 이루어 드립니다.

시험 번호/코드: 000-918

시험 이름: IBM (System Administration for IBM Informix Dynamic Server V11)

ITExamDump는 IT업계에서 유명한 IT인증자격증 공부자료를 제공해드리는 사이트입니다. 이는ITExamDump 의 IT전문가가 오랜 시간동안 IT인증시험을 연구한 끝에 시험대비자료로 딱 좋은 덤프를 제작한 결과입니다. IBM인증 000-918덤프는 수많은 덤프중의 한과목입니다. 다른 덤프들과 같이IBM인증 000-918덤프 적중율과 패스율은 100% 보장해드립니다. IBM인증 000-918시험에 도전하려는 분들은ITExamDump 의IBM인증 000-918덤프로 시험을 준비할것이죠?

000-918 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-918.html

NO.1 Given the following 'onstat -g arc' information:
IBM Informix Dynamic Server Version 11.10.FC1 -- On-Line -- Up 45:18:13 -- 38912 Kbytes
num DBSpace Q Size Q Len Buffer partnum size scanner
Dbspaces - Archive Status
name number level date log log-position
rootdbs 1 0 02/11/2007.22:01 43 0x5338c
1 02/14/2007.22:01 66 0x1b2e8
2 02/16/2007.22:01 75 0x1d2e8
dbs1 2 0 02/14/2007.22:01 43 0x5338c
1 02/14/2007.22:01 66 0x1b2e8
2 02/16/2007.22:01 75 0x1d2e8
On February 16, 2007, at 1:00 PM, a chunk in dbspace bs1 encountered hardware failure.
Which method will restore all of the data, to the point of failure, to a replacement disk drive?
A. a level 0 and 2 restore followed by a logical log restore
B. a level 0 and 1 restore only
C. a level 0 and 1 restore followed by a logical log restore
D. a level 0, 1, and 2 restore followed by a logical log restore
Answer: C

IBM인증   000-918기출문제   000-918   000-918자격증   000-918인증   000-918덤프

NO.2 What will the setting "SQLTRACE level=LOW,ntraces=2000,size=2,mode=global" within the Informix
onconfig file record?
A. statement statistics, statement text, and list of table names
B. statement text, host variables, and statement iterators
C. statement statistics, statement text, and statement iterators
D. statement text, statement iterators, and database name
Answer: C

IBM자격증   000-918   000-918   000-918 dumps   000-918

NO.3 The table called "state" has lock mode set to row within an unbuffered logged database. The onconfig
file has
USELASTCOMMITTED 'COMMITTED READ' set. One user session has run the following:
begin work;
select * from state where code = "AK";
update state set sname = "ALASKA" where code = "AK";
The results from the SQL select statement run by user one was:
AK Alaska
Session two runs the following (session one is still connected):
set isolation to dirty read;
select * from state where code = "AK";
What will session two see when they run the above SQL statements?
A. AK and Alaska
B. AK and ALASKA
C. Error code 244 and isam 107.
D. The session waits until user one is finished processing.
Answer: B

IBM   000-918   000-918   000-918자료

NO.4 Click the Exhibit button.
Given the sqexplain output in the exhibit, which SQL statement will make the est_rows column accurate?
<e ip="918-a-1.jpg"></e>
A. update statistics high for table
B. update statistics high for systables
C. update statistics high for table orders
D. update statistics high for table customer
Answer:A

IBM인증   000-918최신덤프   000-918 dump   000-918 pdf   000-918

NO.5 Which two protocols are used on a Linux platform for IPC connections? (Choose two.)
A. fast fiber
B. shared memory
C. stream pipe
D. named pipe
E. local loopback
Answer: BC

IBM dumps   000-918   000-918자료   000-918자격증   000-918 dump   000-918자료

NO.6 A database administrator uses the following onconfig parameters:
TAPEDEV = /foo/resdev
How will this affect ontape backup?
A. ontape will use the directory /foo/resdev if it exists for storage space backup.
B. ontape will use the definitions for TAPEBLK from the file /foo/resdev.
C. ontape will write an informational message to the file /foo/resdev.
D. ontape will use the definitions for TAPESIZE from the file /foo/resdev.
Answer:A

IBM   000-918   000-918

NO.7 Given the following message log information:
15.56:29 Physical Recovery Started at Page (1:1210).
15:56:29 Physical Recovery Complete: 147 Pages Examined, 10 Pages Restored.
15:56:29 Logical Recovery Started.
15:56:29 10 recovery worker threads will be started.
15:56:32 Logical Recovery has reached the transaction cleanup phase.
15:56:32 Logical Recovery Complete.
5 Committed, 2 Rolled Back, 0 Open, 0 Bad Locks
What would be the reason for the difference in 'Pages Examined' and 'Pages Restored' during physical
recovery?
A. The database server might physically log a page image multiple times between checkpoints.
B. The physical recovery restores only the first logged page image.
C. It is an expected behavior.
D. The physical log size is too large.
Answer:A

IBM기출문제   000-918   000-918   000-918   000-918덤프

NO.8 Both standard and temporary dbspaces are listed in the DBSPACETEMP configuration parameter or
environment variable. Which rule applies?
A. Sort, backup, implicit, and non-logging explicit temporary tables are created in temporary dbspaces if
adequate space
exists.
B. Backup, implicit, and non-logging explicit temporary tables are created in temporary dbspaces if
adequate space exists. Sort temporary tables are specified by the PSORT_DBTEMP environment
variable.
C. Sort, backup, implicit, and non-logging explicit temporary tables are created in all available dbspaces if
adequatespace exists.
D. Explicit temporary tables created without the WITH NO LOG option are created in the root dbspace.
Answer:A

IBM   000-918시험문제   000-918자격증

NO.9 Which command would be used to monitor disk activity per chunk?
A. onstat -g iog
B. onstat -d
C. onstat -g iof
D. onstat -F
Answer: C

IBM덤프   000-918 dump   000-918기출문제

NO.10 Which memory area is used for log records for smart objects?
A. virtual portion of shared memory
B. logical log buffers
C. /tmp
D. DBSPACETEMP
Answer: B

IBM pdf   000-918   000-918덤프   000-918자료

NO.11 Click the Exhibit button.
In the exhibit, how does an IDS database administrator or programmer ensure that only committed data
will be seen and that no locking errors will occur?
<e ip="918-a-3.jpg"></e>
A. Change user 1 isolation level to dirty read.
B. Change user 2 isolation level to dirty read.
C. Change user 1 isolation level to committed read last committed.
D. Change user 2 isolation level to committed read last committed.
Answer: D

IBM   000-918최신덤프   000-918시험문제   000-918

NO.12 Which type of backup and restore (BAR) utility would be suited for restoring a single table from a level 0
backup to a specific point in time?
A. onbar
B. ontape
C. archecker
D. onarchive
Answer: C

IBM   000-918 dumps   000-918   000-918   000-918자격증

NO.13 Which two parameters influence the total size of the resident portion of shared memory? (Choose
two.)
A. RESIDENT
B. BUFFERS
C. LOCKS
D. SHMBASE
E. PHYSBUFF
Answer: CE

IBM자격증   000-918덤프   000-918   000-918자료

NO.14 You detected excessive memory usage that might be caused by a memory leak in the application.
Which twocommands would be useful in this scenario? (Choose two.)
A. onstat -u
B. onstat -g sql -r 120
C. onstat -g ses -r 60
D. onstat -g mgm
E. onstat -g mem
Answer: CE

IBM   000-918   000-918 dumps   000-918 dump

NO.15 When determining the physical log size, what should you consider?
A. RTO_SERVER_RESTART configuration parameter
B. DYNAMIC_LOGS configuration parameter
C. PHYSBUFF configuration parameter
D. LOGFILES configuration parameter
Answer:A

IBM   000-918   000-918   000-918 dump

NO.16 Which two statements are true for an hierarchical routing topology when setting up SQLHOSTS
server group?(Choose two.)
A. Root and nonroot servers only need to maintain their leaf node server groups.
B. Root and nonroot servers must each maintain all server groups within the enterprise.
C. Enterprise Replication will transmit exactly the SQLHOSTS information, there is no need to maintain
them.
D. Each leaf server must have SQLHOSTS information only for itself and its parent.
E. SQLHOSTS entries for nodes that do not directly connect are not required.
Answer: BD

IBM   000-918 pdf   000-918최신덤프   000-918

NO.17 An Informix database server has been configured with the following parameters:
BAR_MAX_BACKUP 5
BAR_NB_XPORT_COUNT 4
BAR_XFER_BUF_SIZE 10
How many data buffers will be created during an onbar parallel backup attempt?
A. 50
B. 20
C. 40
D. 25
Answer: B

IBM dump   000-918기출문제   000-918   000-918

NO.18 An IDS server has its LRU_MIN_DIRTY set to 1 and its LRU_MAX_DIRTY set to 2. Occasionally the
checkpointblocks user transactions from doing updates to the database for too long. How should the
database administrator correct
this situation?
A. Set onconfig parameter AUTO_CKPT to 1 and follow any advice in online.log.
B. Increase the number of page cleaners (i.e. flushers).
C. Increase the buffer pool size.
D. Set the onconfig parameter RTO_SERVER_RESTART to "on".
Answer:A

IBM기출문제   000-918자격증   000-918기출문제   000-918

NO.19 A user wants to save SQL explain output to the file: /tmp/myexplain.out. Which syntax should be used?
A. set explain on file to /tmp/myexplain.out
B. set explain on file /tmp/myexplain.out
C. set explain file /tmp/myexplain.out
D. set explain file to /tmp/myexplain.out
Answer: D

IBM   000-918   000-918   000-918시험문제

NO.20 You are receiving an error when trying to drop a chunk that you think is empty. Which command will
show you if any object is still allocating part of the chunk?
A. oncheck -pe
B. onstat -d
C. oncheck -cD
D. oncheck -cc
Answer:A

IBM자격증   000-918자격증   000-918   000-918자격증

IBM 000-918인증시험은 전업적지식이 강한 인증입니다. IT업계에서 일자리를 찾고 계시다면 많은 회사에서는IBM 000-918있는지 없는지에 알고 싶어합니다. 만약IBM 000-918자격증이 있으시다면 여러분은 당연히 경쟁력향상입니다.