2013년 8월 7일 수요일

IBM 000-744 덤프

ITExamDump에는 전문적인 업계인사들이IBM 000-744시험문제와 답에 대하여 연구하여, 시험준비중인 여러분들한테 유용하고 필요한 시험가이드를 제공합니다. 만약ITExamDump의 제품을 구매하려면, 우리ITExamDump에서는 아주 디테일 한 설명과 최신버전 최고품질의자료를 즉적중율이 높은 문제와 답을제공합니다.IBM 000-744자료는 충분한 시험대비자료가 될 것입니다. 안심하시고 ITExamDump가 제공하는 상품을 사용하시고, 100%통과 율을 확신합니다.


IBM 인증 000-744시험에 도전해보려고 결정하셨다면 ITExamDump덤프공부가이드를추천해드립니다. ITExamDump덤프는 고객님께서 필요한것이 무엇인지 너무나도 잘 알고 있답니다. ITExamDump의 IBM 인증 000-744덤프는IBM 인증 000-744시험을 쉽게 만듭니다.


시험 번호/코드: 000-744

시험 이름: IBM (DS4000 Technical Version 1)

ITExamDump 에서 제공해드리는 IBM 000-744덤프는 아주 우수한 IT인증덤프자료 사이트입니다. IT업계엘리트한 강사들이 퍼펙트한 IBM 000-744 덤프문제집을 제작하여 디테일한 시험문제와 답으로 여러분이 아주 간단히IBM 000-744시험을 패스할 수 있도록 최선을 다하고 있습니다.


IBM인증 000-744시험을 어떻게 패스할가 고민그만하고ITExamDump의IBM 인증000-744시험대비 덤프를 데려가 주세요.가격이 착한데 비해 너무나 훌륭한 덤프품질과 높은 적중율, ITExamDump가 아닌 다른곳에서 찾아볼수 없는 혜택입니다.


000-744 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-744.html


NO.1 A customer wants to use SATA drives to reduce costs. Which application matches SATA use?
A. TSM
B. Exchange
C. application with low IOPS
D. write once, read many times
Answer: C

IBM자격증   000-744   000-744

NO.2 When examining a profile you see the following:
Drive at Enclosure 5, Slot 8 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 8]
How should this be configured for enclosure loss protection?
A. Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 9]
B. Drive at Enclosure 3, Slot 1 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 3, slot 1]
C. Drive at Enclosure 5, Slot 17 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 17]
D. Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 15, slot 19]
Drive at Enclosure 15, Slot 19 [mirrored pair with drive at enclosure 5, slot 9]
Answer: B

IBM시험문제   000-744시험문제   000-744   000-744인증   000-744인증   000-744

NO.3 In the Major Event Log (MEL), what does immediate Availability Initialization (IAF) completed on
logical drive" indicate?
A. The drive has been internally reformatted.
B. The drive has just become accessible by the host.
C. LUN has just been replaced.
D. Hot sparing has occurred.
Answer: A

IBM자료   000-744   000-744   000-744최신덤프   000-744기출문제

NO.4 When configuring a customer's multimedia sequential I/O environment, what must you do?
A. use a small segment size with many disks
B. select a stripe size that is the same or an even multiple of the I/O size
C. use small segment size in conjunction with RAID 0
D. select a segment size that minimizes the occurrences of a single I/O on multiple drives
Answer: B

IBM자료   000-744   000-744인증   000-744 dumps

NO.5 A customer is combining two separate IT operations in one central location. They are using a DS4800.
Performance has been marginal. You look at the DS4800 Performance Monitor and observe that they are
well within the DS4800 performance specifications. Which tool can be used to determine the cause of the
problem?
A. Capacity Magic
B. Bandwidth Estimator
C. IOMeter
D. Disk Magic
Answer: D

IBM덤프   000-744덤프   000-744   000-744자격증

NO.6 You arrive at a customer site to implement the DS4000 solution and find that the customer wants to use
RAID 1+0 instead of RAID 5 for everything. What is a possible concern in this situation?
A. capacity
B. random IO performance
C. throughput performance
D. disk rebuild times
Answer: A

IBM   000-744 dumps   000-744 pdf

NO.7 You have been called in to assist the storage administrator who has been using Global Mirror with an
Enhanced Remote Mirroring (ERM) configuration to mirror the company inventory database from
headquarters to a data warehouse at a remote site. The storage administrator has been re-evaluating this
approach and needs your help to change the mirroring mode to Metro Mirroring for better control over
data going to the remote site. What must you do to help the storage administrator make the change?
A. advise the storage administrator to purchase two new licenses
B. break and re-establish the mirror relationship
C. back up the inventory data to tape
D. make the mode change in Storage Manager
Answer: D

IBM기출문제   000-744   000-744   000-744최신덤프

NO.8 How do you configure SNMP traps in the Storage Manager GUI?
A. from the Subsystem Management window, use the Storage Subsystem menu
B. from the Subsystem Management window, use the Advanced menu
C. from the Enterprise Management window, use the Advanced menu
D. from the Enterprise Management window, use the Edit menu
Answer: D

IBM pdf   000-744   000-744

NO.9 In addition to the storage administrator's e-mail address, what information do you need to set up
e-mail alerts to be sent to the storage administrator?
A. sender's SMTP server address, the sender's e-mail address
B. sender's POP server address, the sender's e-mail address
C. storage administrator's POP server address, the sender's e-mail address
D. storage administrator's SMTP server address, the sender's e-mail address
Answer: A

IBM   000-744인증   000-744덤프   000-744자료

NO.10 What best describes a drive in eplaced status?
A. a drive that has replaced a failed drive and needs to be revived in order to complete the data recovery
process
B. a temporary status for a drive that has replaced a failed drive, but has not yet been reconstructed
C. a hot spare that has spared out for a failed drive in an array causing the hot spare to become the active
drive in the array
D. the final state of a drive that has replaced a failed drive and has been reconstructed
Answer: B

IBM   000-744   000-744자료   000-744

NO.11 What is one disadvantage of managing a storage subsystem through the Fibre Channel IO path?
A. The fibre cable used for data IO cannot be used for management commands.
B. An access logical drive is required to communicate with the controllers.
C. Management commands cannot be encapsulated by the Fibre Channel protocol.
D. Ethernet cables to the controllers are also required to send management commands.
Answer: B

IBM   000-744   000-744

NO.12 When creating a FlashCopy of a logical drive, a repository logical drive is created. The repository
logical drive is for metadata and copy-on-write data when a change is made to the FlashCopy source
logical drive. By default, what is its size?
A. 10% of the source volume
B. 20% of the source volume
C. 50% of the source volume
D. 100% of the source volume
Answer: B

IBM   000-744   000-744최신덤프   000-744

NO.13 Three hosts are redundantly connected to a DS4000 system. Two are running a non-clustered
Windows 2003 Server and the other is running Red Hat Linux. How many Storage Partitions are used in
this configuration?
A. 0
B. 1
C. 3
D. 8
Answer: C

IBM   000-744   000-744자격증   000-744   000-744

NO.14 What does a flashing green LED on a drive indicate?
A. status ok
B. drive active
C. failed drive
D. hot spare in use
Answer: B

IBM dump   000-744 dumps   000-744인증   000-744

NO.15 What is the minimum number of HDDs required for RAID 6?
A. 1
B. 2
C. 3
D. 4
Answer: D

IBM dumps   000-744   000-744

NO.16 To generate a premium feature key that can be installed on a DS4000 subsystem, you must provide
certain information to IBM. This information includes the IBM machine type/model and what additional
information?
A. serial number, activation code, feature enable identifier and e-mail address
B. serial number, activation code, and e-mail address
C. activation code, e-mail address, controller firmware level
D. serial number, and e-mail address, drive firmware level
Answer: A

IBM   000-744   000-744기출문제   000-744기출문제   000-744   000-744 dump

NO.17 When performing an array migration, what is NOT required?
A. verification that there is no logical drive name duplication between the source and target systems
B. removal of mappings for all logical drives within the array being migrated
C. documenting the stripe order of the drives in the array for proper placement on the target subsystem
D. Advanced Maintenance Place Array Offline
Answer: C

IBM인증   000-744자료   000-744최신덤프   000-744자료   000-744   000-744기출문제

NO.18 Which statement is FALSE regarding hot spare drives in the DS4000 subsystem?
A. The storage server will attempt to find a spare in the same enclosure as the failed drive first.
B. The storage server will give preference to a spare the same size as the failed drive.
C. The storage server will use a spare with at least the same capacity as the failed drive.
D. The controller may use a spare that is larger than the failed drive and block the remaining capacity
from use.
Answer: B

IBM dumps   000-744시험문제   000-744자격증   000-744   000-744

NO.19 In the exhibit, which management method is being used?
A. in-band
B. rlogin
C. client-host-band
D. out-of-band
Answer: D

IBM dump   000-744   000-744

NO.20 Which statement about DS4000 firmware upgrades is true?
A. The controller firmware and NVSRAM files are closely tied to each other and must be installed in the
proper combination.
B. Controller firmware and NVSRAM upgrades always require the ESM firmware to be upgraded at the
same time.
C. Only one controller must be accessible via the Ethernet or fiber in order to perform a controller
firmware upgrade.
D. The controller firmware and NVSRAM are independent from each other and can be upgraded at
different times.
Answer: A

IBM덤프   000-744   000-744   000-744   000-744인증

만약 아직도 우리를 선택할지에 대하여 망설이고 있다면. 우선은 우리 사이트에서 ITExamDump가 제공하는 무료인 일부 문제와 답을 다운하여 체험해보시고 결정을 내리시길 바랍니다.그러면 우리의 덤프에 믿음이;갈 것이고,우리 또한 우리의 문제와 답들은 무조건 100%통과 율로 아주 고득점으로IBM인증000-744험을 패스하실 수 있습니다,


댓글 없음:

댓글 쓰기