경쟁율이 치열한 IT업계에서 아무런 목표없이 아무런 희망없이 무미건조한 생활을 하고 계시나요? 다른 사람들이 모두 취득하고 있는 자격증에 관심도 없는 분은 치열한 경쟁속에서 살아남기 어렵습니다. Oracle인증 1Z0-242시험패스가 힘들다한들ITExamDump덤프만 있으면 어려운 시험도 쉬워질수 밖에 없습니다. Oracle인증 1Z0-242덤프에 있는 문제만 잘 이해하고 습득하신다면Oracle인증 1Z0-242시험을 패스하여 자격증을 취득해 자신의 경쟁율을 업그레이드하여 경쟁시대에서 안전감을 보유할수 있습니다.
ITExamDump사이트에서 제공하는Oracle 인증1Z0-242 덤프의 일부 문제와 답을 체험해보세요. 우리 ITExamDump의 를Oracle 인증1Z0-242 덤프공부자료를 선택해주신다면 우리는 최선을 다하여 여러분이 꼭 한번에 시험을 패스할 수 있도록 도와드리겠습니다.만약 여러분이 우리의 인증시험 덤프를 보시고 시험이랑 틀려서 패스를 하지 못하였다면 우리는 무조건 덤프비용 전부를 환불해드릴것입니다. ITExamDump제품으로 자격증을 정복합시다!
ITExamDump의 경험이 풍부한 IT전문가들이 연구제작해낸 Oracle인증 1Z0-242덤프는 시험패스율이 100%에 가까워 시험의 첫번째 도전에서 한방에 시험패스하도록 도와드립니다. Oracle인증 1Z0-242덤프는Oracle인증 1Z0-242최신 실제시험문제의 모든 시험문제를 커버하고 있어 덤프에 있는 내용만 공부하시면 아무런 걱정없이 시험에 도전할수 있습니다.
Oracle인증1Z0-242시험에 도전해보려고 없는 시간도 짜내고 거금을 들여 학원을 선택하셨나요? 사실 IT인증시험은 보다 간단한 공부방식으로 준비하시면 시간도 돈도 정력도 적게 들일수 있습니다. 그 방법은 바로ITExamDump의Oracle인증1Z0-242시험준비덤프자료를 구매하여 공부하는 것입니다. 문항수도 적고 시험예상문제만 톡톡 집어 정리된 덤프라 시험합격이 한결 쉬워집니다.
시험 번호/코드: 1Z0-242
시험 이름: Oracle (PeopleSoft Application Developer II: App Engine and Integration)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 102 문항
업데이트: 2014-02-13
ITExamDump의Oracle인증 1Z0-242 덤프는 수많은 시험준비 공부자료 중 가장 믿음직합니다. ITExamDump의 인지도는 업계에 널리 알려져 있습니다. Oracle인증 1Z0-242덤프로Oracle인증 1Z0-242시험을 준비하여 한방에 시험패스한 분이 너무나도 많습니다. Oracle인증 1Z0-242덤프는 실제Oracle인증 1Z0-242시험문제에 초점을 맞추어 제작한 최신버전 덤프로서 시험패스율이 100%에 달합니다.
ITExamDump의Oracle인증 1Z0-242덤프공부가이드에는Oracle인증 1Z0-242시험의 가장 최신 시험문제의 기출문제와 예상문제가 정리되어 있어Oracle인증 1Z0-242시험을 패스하는데 좋은 동반자로 되어드립니다. Oracle인증 1Z0-242시험에서 떨어지는 경우Oracle인증 1Z0-242덤프비용전액 환불신청을 할수 있기에 보장성이 있습니다.시험적중율이 떨어지는 경우 덤프를 빌려 공부한 것과 같기에 부담없이 덤프를 구매하셔도 됩니다.
1Z0-242 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-242.html
NO.1 You add a dynamic call to an Application Engine program following these steps:
1. Add the fields AE_APPLID and AE_SECTION to the state record if they are not already present.
2. Build the state record.
3. Verify that the state record is the default state record for the Application Engine program.
4. In a PeopleCode action, use a conditional test to populate the fields AE_APPLID and AE_SECTION
with an Application Engine program name and section name, respectively.
5. Following the PeopleCode action, add a Call Section action.
Select the correct statement.
A. The Application Engine program will execute as expected.
B. Step 2 is not needed for dynamic call.
C. Step 3 is not needed.
D. Add a step after step 5 to insert a SQL action that will use the values in the state record to populate the
Program and Section fields of the Application Engine Call Section action.
E. Add a step after step 5 to select the Dynamic Call check box in the Call Section action.
F. Step 4 is wrong. The PeopleCode program should use the AESection class to issue the dynamic call.
Answer: E
Oracle인증 1Z0-242자료 1Z0-242 1Z0-242덤프 1Z0-242덤프 1Z0-242시험문제
NO.2 An Application Engine program requires a loop that will exit after 1000 rows have been processed.
The COUNTER field in the state record is incremented in each iteration of the loop. Which option contains
code that could be used in a Do While action to test for COUNTER?
A. Do While %Bind(Counter) < 1000
B. %SELECT (COUNTER)
FROM PS_INSTALLATION
Where COUNTER < 1000
C. If %Bind(Counter) >= 1000 then
Exit;
D. %Select(COUNTER)
FROM PS_STATE_AET
Where COUNTER < 1000
E. %Select(COUNTER)
SELECT 'X'
FROM PS_INSTALLATION
WHERE %Bind(COUNTER) < 1000;
Answer: E
Oracle덤프 1Z0-242덤프 1Z0-242시험문제
NO.3 An Application Engine program uses a Do Select action. What occurs when the Select statement is
executed?
A. Each row returned by the Select statement is stored in the state record. The Select statement
continues until no more rows are returned. Then, the control passes to the calling section.
B. All rows returned by the Select statement are stored in a cursor. Then, the control is passed to the
calling section.
C. All rows returned by the Select statement are stored in the state record. Then, the control is passed to
the next section in the program.
D. All rows returned by the Select statement are stored in a cursor. The first row is stored in the state
record. Then, the remaining actions in the step are processed sequentially. Thereafter, the control returns
to the Do Select to fetch another row, until no more rows are returned.
E. When a row is returned, the remaining steps in the section execute and control returns to the calling
step.
F. When a row is returned, it is stored in the state record. Then, the control is passed to the calling section.
Answer: D
Oracle 1Z0-242 1Z0-242덤프 1Z0-242기출문제 1Z0-242인증
NO.4 An Application Engine program inserts rows into PS_VENDOR.
The program encounters an error and abends (ends abnormally).
You correct the error, but now PS_VENDOR is in an unknown state.
Select the correct statement.
A. If Log File was enabled in Configuration Manager, a script file was created that you use to return the
database to its original state. After you correct the error, you can run the program again.
B. If Recover was enabled for the program, the changes to PS_VENDOR are rolled back. After you
correct the error, you can run the program again.
C. If Restart was enabled for the program, a checkpoint was saved with the last commit. After you correct
the error, you can restart the program and processing will resume from the point of the last commit.
D. If Resume was enabled in PeopleSoft Process Scheduler, the program automatically resumes
processing after the condition that caused the error is corrected.
E. If a state record was defined for the program, PS_VENDOR is restored based on parameters that were
written to the state record. Then you can restart the program using the same run control parameters.
Answer: C
Oracle 1Z0-242 1Z0-242 1Z0-242
NO.5 The Get Student Enrollments page uses a PeopleCode program to select and display rows based on
user input. When the user clicks Refresh, FieldChange PeopleCode populates a stand-alone rowset
using a Select method. When you test the program, the new rows are appended to the previous rows
instead of replacing them. How do you fix this problem?
A. Use a work scroll instead of a stand-alone rowset.
B. Add &Rowset.Flush(); after the Select method.
C. Use an Update method instead of a Select method.
D. Add &Rowset.Flush(); before the Select method.
E. Add &Rowset.Refresh (); after the Select method.
F. Add &Rowset.Refresh(); before the Select method.
Answer: D
Oracle최신덤프 1Z0-242덤프 1Z0-242기출문제 1Z0-242 1Z0-242
NO.6 How do you configure Process Scheduler to initiate an Application Engine trace for SQL and Step?
A. Add %%TRACE%% %%SQL%% %%STEP%% to the parameter list for the Process Type.
B. On the Run Control page, select the SQL Trace and Step Trace check boxes.
C. On the Process Monitor page, select the SQL Trace and Step Trace check boxes.
D. On the Process Definition Override Options page, for Parameter List, select Append and enter
-TRACE 3.
E. On the Process Definition Override Options page, for Parameter List, select Append and enter -TRACE
SQL STEP.
F. On the Process Definition Override Options page, for Parameter List, select Append and
enter %%TRACE%% %%SQL%% %%STEP%%.
Answer: D
Oracle 1Z0-242 1Z0-242자료
NO.7 Examine the join in this Select statement:
SELECT A.TASK , B.EFFORT_AMT
FROM PS_PROJECT A , PS_EFFORT B
WHERE A.TASK = B.TASK
AND A.RESOURCE = B.RESOURCE
Select the equivalent Select statement.
A. SELECT A.TASK , B.EFFORT_AMT
FROM PS_PROJECT A , PS_EFFORT B
WHERE %Join(A.TASK, B.RESOURCE)
B. SELECT A.TASK , B.EFFORT_AMT
FROM PS_PROJECT A , PS_EFFORT B
WHERE %Common(PROJECT A, EFFORT B)
C. SELECT A.TASK , B.EFFORT_AMT
FROM %Common(KEYS, PROJECT A, EFFORT B)
D. SELECT A.TASK , B.EFFORT_AMT
FROM PS_PROJECT A , PS_EFFORT B
WHERE %Join(COMMON_KEYS, TASK A, EFFORT_AMT B)
E. SELECT A.TASK , B.EFFORT_AMT
FROM %Join(COMMON_KEYS, PROJECT A, EFFORT B)
Answer: E
Oracle덤프 1Z0-242 1Z0-242 1Z0-242인증
NO.8 View the Exhibit.
On the Employee Review page, you have a business rule with these requirements:
1. If Review Type is Supervisor, then the prompt for Reviewer ID returns only supervisors.
2. If Review Type is Peer or Performance, then the prompt for Reviewer ID returns all employees.
Select the three steps required to implement this business rule. (Choose three.)
A. Associate the REVIEWER_ID field with REVIEWER_VW.
B. Create REVIEWER_VW as a dynamic view of the EMPLOYEE table.
C. Add the DERIVED.EDITTABLE field to the page and make it invisible.
D. Set the prompt table edit for the REVIEWER_ID field to REVIEWER_VW.
E. Set the prompt table edit for the REVIEWER_ID field to DERIVED.%EDITTABLE.
F. Use a SQL Select statement in PeopleCode to populate the REVIEWER_VW view.
G. Use a conditional statement in PeopleCode to populate the DERIVED.EDITTABLE field.
Answer: CEG
Oracle 1Z0-242 1Z0-242 dumps
NO.9 Select three Application Engine action types that can be used to control program flow. (Choose three.)
A. Log Message
B. Call Section
C. XSLT
D. PeopleCode
E. Do While
F. Evaluate
Answer: BDE
Oracle시험문제 1Z0-242 1Z0-242 1Z0-242
NO.10 Here is a snippet of PeopleCode that uses the Fetch method of the SQL class.
&SQL = CreateSQL("Select EFFORT_AMT from PS_PSU_TASK_EFFORT where TASK= :1",
PSU_TASK_TBL.TASK);
&Var1 = &SQL.Fetch(&Var2);
Select the two correct statements. (Choose two.)
A. &Var2 specifies which row to fetch.
B. &Var2 specifies which field to fetch.
C. &Var1 is populated with TRUE if a row is fetched.
D. &Var1 is populated with the number of rows returned.
E. &Var2 is populated with EFFORT_AMT from the row fetched.
F. &Var1 is populated with EFFORT_AMT from the row fetched.
G. &Var1 is populated with EFFORT_AMT from the first row returned.
Answer: CE
Oracle시험문제 1Z0-242 1Z0-242
NO.11 A Process Scheduler process is configured to run an Application Engine program. You need to modify
the process to use parameters entered by the user at run time. Which four additional steps do you need to
take? (Choose four.)
A. Create a process type for the new process.
B. Add bind variables to the command-line parameters.
C. Write a PeopleCode program to pass the parameters.
D. Create a state record with fields to pass input parameters.
E. Create a run control page with fields to enter the input parameters.
F. Create a run control record with fields to store the input parameters.
G. Modify the Application Engine program to retrieve the input parameters.
Answer: DEFG
Oracle dump 1Z0-242자료 1Z0-242덤프 1Z0-242
NO.12 The Customer Orders page uses data from the ITEM table to perform price calculations. You decide to
write a PeopleCode program to create a stand-alone rowset that will load data from the ITEM table into
the data buffer. Select three PeopleCode statements that can be used with stand-alone rowsets. (Choose
three.)
A. &RS_Item = GetRowSet(SCROLL.ITEM);
B. &RS_Item = CreateRowSet(RECORD.ITEM);
C. &Price = &RS_Item(&i).ITEM.PRICE.Value;
D. &RS_Item.Select("Where ITEM = :1", CUST_ORDER.ITEM);
E. &RS_Item.Fill("Where CUST_TYPE = :1", CUST_ORDER.TYPE);
F. &RS_Item = ScrollSelect(1,Scroll.ITEM, Record.ITEM, ("Where CUST_TYPE = :1", CUST_ORDER.
CUST_TYPE);
Answer: BCE
Oracle pdf 1Z0-242 1Z0-242최신덤프 1Z0-242
NO.13 You modify an Application Engine program to use parallel processing with temporary tables.
The Application Engine program includes this code snippet, which is part of a SQL statement that inserts
rows into a temporary table.
INSERT INTO PS_CRS_FULL_TMP
What changes do you need to make to the code so that the Application Engine program will implement
parallel processing properly?
A. No changes to the code are needed as long as the temporary table has been properly configured for
parallel processing.
B. Replace INSERT INTO PS_CRS_FULL_TMP with %INSERT INTO PS_CRS_FULL_TMP so that the
meta-SQL resolves to the correct state record at run time.
C. Replace INSERT INTO PS_CRS_FULL_TMP with %INSERT INTO %Table(CRS_FULL_TMP) so that
the system variables resolve to the correct syntax at run time.
D. Replace INSERT INTO PS_CRS_FULL_TMP with INSERT INTO %Table(CRS_FULL_TMP) so that
the meta-SQL resolves to the correct temporary table instance at run time.
E. Replace INSERT INTO PS_CRS_FULL_TMP with %INSERT INTO %Temp(CRS_FULL_TMP) so that
the meta-SQL resolves to the correct syntax and temporary table instance at run time.
Answer: D
Oracle인증 1Z0-242 1Z0-242덤프 1Z0-242
NO.14 Evaluate this PeopleCode snippet.
Local Array of Number &MyArray;
Local Any &Len, &Result;
&MyArray = CreateArray(3);
&MyArray[1] = 100;
&MyArray[2] = 200;
&MyArray[3] = 300;
&Result = &MyArray.POP();
&Len = &MyArray.LEN;
&End = &MyArray[&Len];
What are the correct values for &Result and &End?
A. &Result is 300
&End is 200
B. &Result is 300
&End is Null
C. &Result is 300
&End is 300
D. &Result is Null
&End is 300
E. &Result is 100
&End is 300
Answer: A
Oracle 1Z0-242 1Z0-242 1Z0-242자료 1Z0-242시험문제
NO.15 View the Exhibit.
An object-oriented PeopleCode program traverses the data buffer to get the value for Session Number
(SESSION_NBR) in the Session Details record (PSU_CRS_SESSN) on the Course Sessions page.
The program uses a built-in function to instantiate the Level 0 object, then uses object methods to
instantiate the remaining data buffer objects.
Select the option that represents the order in which the program instantiates the data buffer objects.
A. &Row_Level0, &Row _Level1, &Record, &Field
B. &Rowset_Level0, &Row_Level1, &Record, &Field
C. &Rowset_Level0, &Rowset_Level1, &Row_Level1, &Record, &Field
D. &Rowset_Level0, &Row _Level0, &Rowset_Level1, &Row _Level1, &Record, &Field
Answer: D
Oracle시험문제 1Z0-242 dump 1Z0-242 pdf 1Z0-242
NO.16 View the Exhibit.
A PeopleCode program at level 0 checks the values for Percent Available (PCT_AVAILABLE) at level 1.
Analyze this code snippet.
Local Rowset &RS_Level0, &RS_Level1;
Local Row &Row_Level0, &Row_Level1;
Local Record &Rec_TaskRsrc;
Local Field & Fld_PctAvail ;
&RS_Level0 = GetLevel0();
&Row_Level0 = &RS_Level0.GetRow(1);
&RS_Level1 = &Row_Level0.GetRowset(Scroll.PSU_TASK_RSRC);
&Row_Level1 = &RS_Level1.GetRow(1);
&Rec_TaskRsrc = &Row_Level1.GetRecord(Record.PSU_Task_RSRC);
&Fld_PctAvail = &Rec_TaskRsrc.GetField(Field.PCT_AVAILABLE);
&Pct = &Fld_PctAvail.Value;
Select the correct option.
A. The program will produce the expected results.
B. The program is missing a loop to process each row in the level 1 rowset.
C. The program is missing a loop to process each rowset in the level 1 row.
D. The program can be simplified to:
&Pct = &RS_Level0.PSU_Task_RSRC.PCT_AVAILABLE.Value;
E. This line of code is not needed:
&RS_Level1 = &Row_Level0.GetRowset(Scroll.PSU_TASK_RSRC);
F. The &RS_Level0 = GetLevel0(); function is missing the Level 0 scroll name.
Answer: B
Oracle 1Z0-242자격증 1Z0-242 1Z0-242인증 1Z0-242자료
NO.17 You want to see exactly when a PeopleCode program fires in the context of the Component Processor
flow. Which two methods will work? (Choose two.)
A. Insert a Print() statement in the program.
B. Insert a WinMessage() statement in the program.
C. Insert a MessageCatalog() statement in the program.
D. Run the PeopleCode Debugger and insert a breakpoint on the program.
E. Run the PeopleCode Debugger and select Debug, View Component Buffers.
Answer: BD
Oracle기출문제 1Z0-242 1Z0-242시험문제 1Z0-242 pdf 1Z0-242기출문제
NO.18 View the Exhibit.
Your client is upgrading its purchasing application to use object-oriented PeopleCode to incorporate the
benefits of application classes.
The PeopleCode for the Purchase Order application is now encapsulated in an Application Package
called PSU_PO. The assign_order_nbr function is now ORDER_NBR, a method of the ORDER class.
You are tasked with modifying this program to call the new ORDER_NBR method.
Which four PeopleCode statements will you use in the new program? (Choose four.)
A. Class PSU_PO:ORDER;
B. &New.ORDER_NBR(PSU_PO_HDR.ORDER_NBR);
C. Import PSU_PO:ORDER;
D. Declare method PSU_PO:ORDER:ORDER_NBR;
E. &New = Create Order();
F. Local ORDER &New;
G. Method ORDER_NBR (&ORDER_NBR As Field out);
Answer: BCEF
Oracle 1Z0-242자료 1Z0-242시험문제 1Z0-242
NO.19 View the Exhibit.
This run control page executes an Application Engine program that updates the Course table using the
parameters entered by a user.
In addition to the run control page, which three elements must be in place? (Choose three.)
A. A state record with fields to hold input parameters
B. Component variables to pass the input parameters
C. A data buffer object to retrieve the input parameters
D. Application Engine SQL to retrieve the input parameters
E. A PeopleCode record object to update the Course table
F. A Process Instance table to store run control parameters
G. A run control record with fields to store the input parameters
Answer: ADG
Oracle최신덤프 1Z0-242 1Z0-242 1Z0-242최신덤프
NO.20 You want to examine the component buffer for the Customer Orders (PSU_CUST_ORDER )
component. Which four steps are necessary? (Choose four.)
A. Start the PeopleCode Debugger and set a breakpoint.
B. Access the Structure view on the PSU_CUST_ORDER component.
C. In Application Designer, select Component Buffers.
D. Access the Customer Orders component in the browser and trigger the breakpoint. Return to
PeopleSoft Application Designer when the breakpoint triggers.
E. Open, or create, a PeopleCode program that will execute while Customer Orders is running in the
browser.
F. Drill down through the component hierarchy in the Structure view on the PSU_CUST_ORDER
component.
G. In Application Designer, select Debug, View Component Buffers.
Answer: ADEG
Oracle dumps 1Z0-242시험문제 1Z0-242 1Z0-242기출문제
ITexamdump의 NS0-504덤프의 VCE테스트프로그램과 400-051덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HH0-050시험에 대비한 고품질 덤프와 1Y0-A28시험 최신버전덤프를 제공해드립니다. 최고품질 600-199시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기