Juniper JN0-140 덤프자료

최근 Juniper인증 JN0-140시험이 IT업계에서 제일 높은 인지도를 가지고 있습니다.바라만 보지 마시고Juniper인증 JN0-140시험에 도전해보세요. ITExamDump 의 Juniper인증 JN0-140덤프로 시험준비공부를 하시면 한방에 시험패스 가능합니다. Juniper인증 JN0-140덤프로 자격증취득에 가까워지고 나아가서는 IT업계에서 인정을 받는 열쇠를 소유한것과 같다고 할수 있습니다.

ITExamDump의 덤프선택으로Juniper JN0-140인증시험에 응시한다는 것 즉 성공과 멀지 않았습니다. 여러분의 성공을 빕니다.

Juniper인증 JN0-140시험준비중이신 분들은Juniper인증 JN0-140시험통과가 많이 어렵다는것을 알고 있을것입니다. 학교공부하랴,회사다니랴 자격증공부까지 하려면 너무 많은 정력과 시간이 필요할것입니다. 그렇다고 자격증공부를 포기하면 자신의 위치를 찾기가 힘들것입니다. ITExamDump 덤프는 IT인증시험을 대비하여 제작된것이므로 시험적중율이 높아 다른 시험대비공부자료보다 많이 유용하기에 IT자격증을 취득하는데 좋은 동반자가 되어드릴수 있습니다. ITExamDump 덤프를 사용해보신 분들의 시험성적을 통계한 결과 시험통과율이 거의 100%에 가깝다는 놀라운 결과를 얻었습니다.

ITExamDump는Juniper JN0-140인증시험의 촉매제 같은 사이트입니다.Juniper JN0-140인증시험 관연 덤프가 우리ITExamDump에서 출시되었습니다. 여러분이Juniper JN0-140인증시험으로 나 자신과 자기만의 뛰어난 지식 면을 증명하고 싶으시다면 우리 ITExamDump의Juniper JN0-140덤프자료가 많은 도움이 될 것입니다.

ITExamDump에서는 시장에서 가장 최신버전이자 적중율이 가장 높은 Juniper인증 JN0-140덤프를 제공해드립니다. Juniper인증 JN0-140덤프는 IT업종에 몇십년간 종사한 IT전문가가 실제 시험문제를 연구하여 제작한 고품질 공부자료로서 시험패스율이 장난 아닙니다. 덤프를 구매하여 시험에서 불합격성적표를 받으시면 덤프비용 전액을 환불해드립니다.

우리는 여러분이 시험패스는 물론 또 일년무료 업데이트서비스를 제공합니다.만약 시험에서 실패했다면 우리는 덤프비용전액 환불을 약속 드립니다.하지만 이런 일은 없을 것입니다.우리는 우리덤프로 100%시험패스에 자신이 있습니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는Juniper인증JN0-140시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.

지금 같은 경쟁력이 심각한 상황에서Juniper JN0-140시험자격증만 소지한다면 연봉상승 등 일상생활에서 많은 도움이 될 것입니다.Juniper JN0-140시험자격증 소지자들의 연봉은 당연히Juniper JN0-140시험자격증이 없는 분들보다 높습니다. 하지만 문제는Juniper JN0-140시험패스하기가 너무 힘듭니다. ITExamDump는 여러분의 연봉상승을 도와 드리겠습니다.

시험 번호/코드: JN0-140

시험 이름: Juniper (Certified Internet Associate (JNCIA-AC) 140 Exam)

JN0-140 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-140.html

NO.1 Which two actions are required to configure an Infranet Enforcer to communicate with an Infranet
Controller? (Choose two.)
A. Enable SSH.
B. Configure DNS.
C. Enable route mode.
D. Set certificate validation options.
Answer: AD

Juniper   JN0-140   JN0-140자격증   JN0-140시험문제

NO.2 What is true about the operation of the Infranet Enforcer?
A. It assigns users a set of roles.
B. It allows access based on auth table entries.
C. It verifies whether an endpoint meets security requirements.
D. It configures the UAC agent to allow or deny access to resources.
Answer: B

Juniper   JN0-140 dumps   JN0-140

NO.3 A customer has installed UAC in their network. They have both Windows and Linux endpoints and
must choose a deployment method that everyone can use. Which deployment method allows for multiple
platforms?
A. IPsec enforcement
B. 802.1X enforcement
C. Source IP enforcement
D. Odyssey Access Client
Answer: C

Juniper기출문제   JN0-140   JN0-140덤프

NO.4 Which additional configuration must be completed when setting up role restrictions using certificates?
A. Set up a certificate authentication server.
B. Configure the authentication realm to remember certificate information.
C. Configure the authentication realm to use a certificate server for authentication.
D. Configure a role mapping rule requiring certification information to map user to role.
Answer: B

Juniper시험문제   JN0-140자격증   JN0-140   JN0-140

NO.5 Which two statements are true about applying Host Checker at the realm level? (Choose two.)
A. If Evaluate is checked then the client must pass policy to get the sign-in page.
B. If Evaluate is checked then the client can fail policy and still get the sign-in page.
C. If Require and Enforce is checked then the client must pass policy to get the sign-in page.
D. If Require and Enforce is checked then the client can fail policy and still get the sign-in page.
Answer: BC

Juniper시험문제   JN0-140   JN0-140자격증

NO.6 On a pre-existing OAC, which three options can the Infranet Controller overwrite when the user
accesses the Infranet Controller? (Choose three.)
A. SSID
B. login name
C. MAC address
D. wired adapters
E. encryption method
Answer: ADE

Juniper dumps   JN0-140덤프   JN0-140   JN0-140기출문제

NO.7 What happens when Host Checker is configured to perform checks every "0" minutes?
A. Host Checker is disabled.
B. Host Checker will perform continous checks.
C. Host Checker will perform checks when user logs out.
D. Host Checker will perform checks when user first logs in.
Answer: D

Juniper   JN0-140   JN0-140시험문제

NO.8 Which interface does the Infranet Controller use to push the configuration?
A. trusted port
B. internal port
C. trust interface
D. untrust interface
Answer: B

Juniper   JN0-140 dump   JN0-140시험문제   JN0-140자료   JN0-140

NO.9 When the Infranet Enforcer is set up in transparent mode, which additional resource policy must be
configured to use OAC for IPsec enforcement?
A. IPsec Routing
B. Access Control
C. IP Address Pool
D. Source Interface
Answer: D

Juniper최신덤프   JN0-140 dumps   JN0-140   JN0-140

NO.10 Which configuration option can be set either in the initial console menu or the Admin UI of the Infranet
Controller?
A. VLAN ID
B. Hostname
C. Domain name
D. Administrative timeout
Answer: C

Juniper   JN0-140   JN0-140덤프   JN0-140최신덤프

NO.11 What will serve as a RADIUS Client to the Infranet Controller for 802.1x authentication?
A. an ACE server
B. a wireless network
C. an Ethernet switch
D. Odyssey Access Client
Answer: C

Juniper   JN0-140인증   JN0-140 pdf   JN0-140   JN0-140최신덤프

NO.12 If Host Checker restrictions are applied at the role level and the "Allow access to the role if any ONE of
the select policies is passed" option is unchecked, which two statements are true? (Choose two.)
A. All roles are evaluated together.
B. Each role is evaluated separately.
C. Clients must pass all policies to access the role.
D. Clients will pass as long as one policy is accepted.
Answer: BC

Juniper   JN0-140   JN0-140시험문제   JN0-140   JN0-140인증

NO.13 Which three statements about dynamic filtering are true? (Choose three.)
A. Dynamic filtering creates a query statement.
B. Dynamic filtering has an option to save query.
C. Dynamic filtering can select any log field to filter.
D. Dynamic filtering permanently removes other log entries.
E. Dynamic filtering redraws the log when you select a variable link.
Answer: ABE

Juniper최신덤프   JN0-140   JN0-140   JN0-140

NO.14 Which action is optional when adding an authentication realm for use on an Infranet Controller?
A. Modify sign-in policy.
B. Configure role mapping.
C. Assign authentication server.
D. Configure authentication policy.
Answer: D

Juniper자격증   JN0-140자료   JN0-140   JN0-140 pdf

NO.15 Your company has a mix of employees and contractors. Contractor usernames always begin with
"con-"; employee usernames never begin with "con-". You need to give employees access to all
resources and give contractors access to a limited set of resources. Employee and contractor roles have
been created with the appropriate access privileges, and the realm is set to merge settings for all
assigned roles. Which role mapping ruleset would result in the correct access privileges being assigned?
A. username="*" -> Employee-role Stop username="con-*" -> Contractor-role
B. username="*" -> Employee-role username="con-*" -> Contractor-role Stop
C. username="con-*" -> Contractor-role Stop username="*" -> Employee-role
D. username="con-*" -> Contractor-role username="*" -> Employee-role Stop
Answer: C

Juniper최신덤프   JN0-140   JN0-140덤프

NO.16 What must be updated regularly to detect the newest versions of personal firewalls on endpoints?
A. Infranet Enforcer firmware
B. Infranet Controller rollback software
C. Host Security Assessment Plug-in (HSAP)
D. Endpoint Security Assessment Plug-in (ESAP)
Answer: D

Juniper   JN0-140 dumps   JN0-140   JN0-140   JN0-140덤프

NO.17 Which log contains information about service restarts, system errors, warnings, and requests to check
server connectivity?
A. Events log
B. System log
C. User Access log
D. Admin Access log
Answer: A

Juniper   JN0-140자료   JN0-140   JN0-140기출문제

NO.18 Which statement is correct about defining an Infranet Enforcer for use as a RADIUS Client?
A. You do not need to configure a RADIUS client policy.
B. You must know the exact model number of the Infranet Enforcer.
C. You must specify the NACN password of the device in the RADIUS client policy.
D. You do not need to designate a location group to which the Infranet Enforcer will belong.
Answer: A

Juniper   JN0-140 dump   JN0-140기출문제   JN0-140   JN0-140덤프

NO.19 What is the primary purpose of creating a Location Group Policy?
A. to associate more than one realm with an authentication server
B. to logically group network access devices and associate them with specific sign-in policies C. to allow
or prevent users from accessing resources in specific locations on the network
D. to define the URL that users of network access devices can use to access the Infranet Controller
Answer: B

Juniper시험문제   JN0-140   JN0-140자료   JN0-140   JN0-140

NO.20 Which two methods of authentication are used by the Infranet Controller for IPSec enforcement?
(Choose two.)
A. dial-up VPN
B. IKE authentication
C. XAuth authentication
D. shared IKE authentication
Answer: AC

Juniper덤프   JN0-140 pdf   JN0-140

Juniper JN0-140인증시험은 현재IT인사들 중 아주 인기 잇는 인증시험입니다.Juniper JN0-140시험패스는 여러분의 하시는 일과 생활에서 많은 도움을 줄뿐만 아니라 중요한 건 여러분의IT업계에서의 자기만의 자리를 지키실 수 잇습니다.이렇게 좋은 시험이니 많은 분들이 응시하려고 합니다,하지만 패스 율은 아주 낮습니다.